ADE MicroSense 6360 thickness/

Listing description

Non-contact Hard disk/ wafer/ CD/ DVD platter gauging platform. Unit is setup for measuring hard drive platters , but can be easily adapted with a "Universal Platter" by removing 2 screws in a few minutes. Simple one button operation, with clear display of PASS or FAIL. Unit displays and measures minimum and maximum thickness, average thickness and taper(TTV) for each measurement scan operation. Unit self calibrates before each measurement providing excellent accuracy.
Thickness accuracy is plus or minus 1 micron. Limits can be set for maximum and minimum thickness allowing pass/fail indication. Taper start and end points can be set by the operator. Built in database saves thickness data along with other user set parameters. The database has fields that can be configured by the user for lot number, user number, tracking , sorting, etc. Individual measurement parameters can be set and stored for various user created templates. Non-contact sensors never touch the substrate. Measurements for taper/thickness are taken every 2.5mm. Measurement time is 2 seconds per scan. Operating system is monitored by internal machine diagnostics and error detection. Reliable, DOS based software has stable performance. Printer support. Guaging platform is 8" H x 11"W x 23" L. Power requirements are 90-250 VAC,
47-63 Hz, 200 watts maximum. The unit comes with 30, 40 and 50 mil gauge blocks, spare belts, software on disk and operating manual.

This equipment is located in US