Biesse Rover C9 CNC Ed

Listing description

BIESSE ROVER C9.65 EDGE CNC MACHINE
stock no:

13818
The Biesse edgebanding centres in the Rover C series mean that it is possible to complete processing of a shaped and edgebanded panel in a single machine. The ease and speed with which the operating sections are tooled up, rapid changeover of the boring head bits and the automatic working area reconfiguration system make Rover C Edge processing centres suitable to machine small batches.

Brochure Download

Technical Specification:
Machine Manufactured

2007

Serial No

9865000
Model

Rover C 9.65 Edge
Original Specification / Description -
numerically controlled machining center with 2 independent Y axes

Y1 axis for the main operating units

Y2 axis for the edgebanding unit

Working fields - configuration 1 assembled on

the Y1 carriage:

X = 6450 mm; Y = 1935 mm; Z = 225 mm;

Working fields for edgebanding in combination

with configuration 1 assembled on the Y1

carriage:

X = 5580 mm; Y = 1972 mm;

Working fields - configuration 2 assembled on

the Y1 carriage:

X = 6200 mm; Y = 1935 mm; Z = 225 mm;

Working fields for edgebanding in combination

with configuration 2 assembled on the Y1

carriage:

X = 5330 mm; Y = 1972 mm

7300659

10 ATS panel supports - L = 1800 mm - 40

NR

1

sliding bases

7300513

Belt conveyor for the removal of chips and

NR

1

off-cuts

7350283

Division of the vacuum system in 2 work areas

NR

1

in X

Division of the pneumatic system in 2 work

areas in X

7350430

10 Stops with a stroke of 115 mm

NR

1

7350426

10 Stops with a stroke of 140 mm positioned at

NR

1

770 mm (L= 1280, 1525, 1800 mm)

7350601

6 Side stops with a stroke of 140 mm (2 Lh + 2

NR

1

Rh + 2 for edgbanding unit) inclusive of the

pneumatic system

7350602

3 Additional side stops with a stroke of 140 mm

NR

1

(1 Lh + 1 Rh + 1 for edgbanding unit)

7350053

Sensor for the detection of lowered stop.

NR

29

One sensor on each stop the machine is equipped

with should be selected.

7350205

Pneumatic system for bar supports -
2

NR

1

independent work areas in X

7350245

10 Bar supports for modules H = 74 mm

NR

1

7300911

Vacuum system for a 250 m3/h pump

NR

1

7300918

250 m3/h vacuum pump

NR

1

7800200

Configuration 1

NR

1

7800201

Composition C1-A1

NR

1

7200032

Boring head BH 22 L

NR

1

SLOT1

SLOT 1

NR

1

7212072

12 kW (16.1 HP) Electrospindle with HSK F63

NR

1

adaptor, air cooled

7212032

Operating device with 360? rotation and gear

NR

1

transmission.

Incompatible with the flange for aggregate

assembly.

7240005

Blower/Edge heater

NR

1

7800203

Composition C1-P1

NR

1

7240100

Edgebanding unit

NR

1

7240007

Combined edge-scraping/glue-scraping unit - HSK

NR

1

63F adaptor

(tools not included)

7241000

Corner-rounding tool equipped with HSK 63F tool-
NR

1

holder

7241019

Set of shaped tools (R = 2 mm) for

NR

1

edge-scraping, for combined

edge-scraping/glue-scraping unit, to perform a

2 mm radius on the top and bottom sides of the

applied banding material

7291058

Belt tool changer with 14 places at 180 mm

NR

1

centerdistance

7250090

HSK F63 Aggregate for sawblade unit with max.

NR

1

dia. 215 mm

7001104

215 mm sawblade for aggregate with vertical

NR

1

sawblade

7000200

Automatic lubrication system

NR

1

7000505

Customized machine acceptance test

NR

1

7510026

Videodiagnosis

NR

1

7510011

MANUAL LASER BAR CODE READER

NR

1

This equipment is located in GB

Please note that this description may have been translated automatically.