-
Machinery
Choose from 20,295 used machinery listings
- Auctions
- Sell machines
- Sell complete plants
- What is Kitmondo?
- About us
- Blog
Digital Betacam is in widespread use world-wide for producing high quality programs. The DVW-M2000/P is the most fully featured VTR in the line-up. It replaces the DVW-A500/P, which for the last 10 years has been the de-facto tool for standard definition productions of the highest quality.
Outstanding picture quality of the Digital BETACAM Format
Optional HD up-conversion capability
Powerful Legacy Playback Capability
High-quality Digital Audio
Dynamic Motion Control (DMC) functionality
Power requirements 100 to 240 V, 50/60 Hz
Power consumption 220 W
Operating temperature +5 to +40 °C (41 to 104 °F)
Storage temperature -20 to +60 °C (-4 to +140 °F)
Humidity 20 to 90%
Mass 23.5 kg (52 lb 11 oz)
Dimensions (W x H x D) 427 x 174 x 544 mm (16 7/8 x 6 7/8 x 21 1/2 inches)
Tape speed Digital BETACAM: 96.7 mm/s MPEG IMX: 64.467(NTSC)/53.776(PAL) mm/s BETACAM SX: 59.515 (NTSC)/59.575 (PAL) mm/s BETACAM/BETACAM SP: 118.6 (NTSC)/101.51 (PAL) mm/s
Recording/playback time (Digital Betacam) Max. 124 min with BCT-D124L cassette
Fast forward/rewind time Approx. 3 min with BCT-D124L cassette
Search speed range - Shuttle mode Digital BETACAM: Still to ±50 times normal speed playback MPEG IMX: Still to ±78 times normal speed playback BETACAM SX: Still to ±78 times normal speed playback BETACAM/BETACAM SP: ±35 (NTSC)/±42
Servo lock time 0.5 (NTSC)/0.7 (PAL) s or less (from standby on)
Load/unload time 6 s or less (both L and S cassettes)
Input / Output Signals
Analog composite input BNC (x2, including one loop through out), 1.0 Vp-p, 75 O, sync negative
Analog composite output BNC (x3, including one character out), 1.0 Vp-p, 75 O, sync negative
Analog component input BNC (x3, for 1 set, Y/R-Y/B-Y),Y: 1.0 Vp-p, 75 O, sync negative, R-Y/B-Y: 0.7 Vp-p, 75 O
Analog component output BNC (x3, for 1 set, Y/R-Y/B-Y),Y: 1.0 Vp-p, 75 O, sync negative, R-Y/B-Y: 0.7 Vp-p, 75 O
SDI input BNC (x2, including one active through out), SMPTE 259M (ITU-R BT.656-3), 270 Mb/s
SDI output BNC (x3, including one character out), SMPTE 259M (ITU-R BT.656-3), 270 Mb/s
HD-SDI output (option) BNC (x3)
Analog audio input XLR (x4) (4CH: channel selectable)
Analog audio output XLR (x4) (4CH: channel selectable)
Cue audio input XLR (x1, only Digital Betacam recording)
Cue audio output XLR (x1, only Digital Betacam playback)
Digital audio input BNC (x2), 4 channels, AES/EBU, default 48kHz (32 to 48kHz with sample rate converter), complies with AES-3id-1995
Digital audio output BNC (x4), 8 channels, AES/EBU, 48kHz fixed, complies with AES-3id-1995
Remote (RS-422A) D-sub 9-pin (x2), Sony 9-pin remote interface
RS-232C (ISR) D-sub 9-pin (x1), RS-232C interface
Parallel remote D-sub 50-pin (x1)
Video control D-sub 15-pin (x1, for connection with BVR-50/50P Video Controller) D-sub 9-pin (x1, for connection with HKDV-503/900 Video Controller)
Control panel Circular connector 10-pin
Time code input XLR (x1)
Time code output XLR (x1)
Memory card insertion slot "Memory Stick" slot (x1)
Monitor output L/R XLR (x2) (channel selectable)
Phones JM-60 Stereo phone jack
Processor adjustment range
Video level ±3 dB/8 to +3 dB, selectable
Chroma level ±3 dB/8 to +3 dB, selectable
Set up/black level ±30 IRE/±210 mV
Chroma phase/hue ±30°
System sync phase ±15 µs
System SC phase ±200 ns
Y/C delay ±100 ns (Betacam/Betacam SP playback only)
Composite input level ±3 dB
Digital video performance
Sampling frequency Y: 13.5MHz, R-Y/B-Y: 6.75MHz
Quantization 10 bit/sample (compression: 8 bit/sample)
Digital input to analog component output D/A quantization: 10 bits/sample, Bandwidth: Y: 0 to 5.75MHz +0.5/-2.0 dB, R-Y/B-Y: 0 to 2.75MHz +0.5/-2.0 dB, S/N ratio: 62 dB or more, K-factor (2T pulse): 1% or less
Analog component input to analog component output A/D and D/A quantization: 10 bits/sample, Bandwidth: Y: 0 to 5.75MHz +0.5/-2.0 dB, R-Y/B-Y: 0 to 2.75MHz +0.5/-2.0 dB, S/N ratio: 56 dB or more, K-factor (2T pulse): 1% or less, LF non-linearity: 3%
Analog composite input to analog composite output A/D and D/A quantization: 10 bits/sample, Bandwidth: 0 to 5.75MHz +0.5/-2.0 dB, S/N ratio: 56 dB or more, Differential gain: 2% or less, Differential phase: 2° or less, Y/C delay: 20 ns or less
Digital audio performance
Sampling frequency 48kHz (Syncronized with video)
Quantization 20 bit/sample
Analog input to analog output Frequency response (0 dB at 1kHz): 20 Hz to 20kHz +0.5/-1.0 dB, Dynamic range (at 1kHz, emphasis ON): More than 95 dB, Distortion (at 1kHz, emphasis ON, reference level): Less than 0.05%, Cross
Head room 20 dB (18 dB selectable)
Emphasis (ON/OFF selectable in REC mode) T1=50 µs, T2=15 µs
Supplied Accessories
Included PSW 4x16 Rack mount screw (4), Operation manual (1), Installation manual (1)
This equipment is located in US
Manufacturer | Dvw-m2000p digt |
Model | DVW-M2000P Digt |
Year | - |
Country | USA |
Condition | Good |
Main category | Broadcast, Film and Audio |
Subcategory | Editing Equipment |
ID | P30117003 |
Client type | Unknown |
On Kitmondo since | 2013 |
Number of listings | 0 |
Country | USA |
Last activity | Jan. 17, 2013 |