Interlake Pick modules an

Listing description

We can offer the following distribution center equipment for less than ten percent of the original cost at 2.5 million. For only 250,000
dollars you will own all of the following equipment. In the used material handling market there is over 1.5 million in retail value/ lending value. Call soon this will not last. It is offered standing FOB east coast USA

3, 3 story pic mods, 20 bays 4 trays x
3 high, with 10' wide bar grate
in rear with pallet flow for replenishment,+ 2 stairways,
side 2 has 22
bays , 4 trays each level, all trays have 24" tilt tray, 12" rear impact
and 84" of roller, with 5 lanes, all 90" wide x 120" deep, selecta flow,
breakdown trays for a total of 128 trays per module x 3 modules, 12'
wide bar grating from tray to tray , with 200' of 24" line shaft with
380' of 24"
graviity 1.5" 3" centers on each level, approx 3420' of gravity and
1800' of line shaft on all 3 modules along with 2400 lin. Ft of
staggered wheel pallet flow rails. There are powered spiral units at
each end of each module by Ryson, from there material is conveyed
through bldg with numerous inclines and declines and 24"
line shaft, it
converges on a 40' x 88'
Torbec mezz, resin deck over b deck, 14" 6" x 20' centers , 9' clear,
from there you have lines from receiving and lines to shipping , approx
1400' of line shaft, 400'' of 36" 1.9" 3" centers and
400' of 24" skate
wheel, many curves, 90s, lift gates, 3 powered nest a flex to 50', along
with 466 , 48"
x 24' new style # 25, 66, 48" x 24' Teardrop # 75, 5244, 108" x 03"
beams #282, 860 , 96" beams # 485-, 5244 , small step wire decks 48" x
52",
860, full step wire decks 48" x 46", there is 24,000 sq. ft. bar
grating, and 8946' of 3" x 4" guide rail , punched 2' centers

This equipment is located in US