-
Machinery
Choose from 20,411 used machinery listings
- Auctions
- Sell machines
- Sell complete plants
- What is Kitmondo?
- About us
- Blog
SONY DSR-1800P DVCAM VTR with SDI and Firewire
This VTR is in immaculate condition. It has been lightly used (only 72 head hours) and has been treated with care.
Power requirements: AC 100 V / 240V @50 /60 Hz
Power consumption: 100 W (with all options)
Operation Temperature : 5 C /40 C
Storage temperature : -20C - +60 C
Operating relative humidity: Less than 80%
Storage relative humidity: Less than 90%
Mass: 13 Kg
Tape speed : 28.221 mm/s
Recording/Playback time: Standard size/ Mini size; 184 minutes /40 minutes
FF/REW time Standard size/ Mini size Less than 3 minutes /Less than 1 minutes
Search speed: Max.: 85 times normal speed, forward and reverse via RS-422A
Video performance
Band width
Luminance: 25 Hz to 5.0 MHz +/-1.0 dB
Chrominance: 25 Hz to 2.0 MHz +1.0/-2.0 dB
S/N Ratio: More than 55 dB
K-factor: 2.0% or less(K2T,KPB)
Y/C delay: Less than 30 ns
Audio performance2Ch mode(48kHz/16bits)/ 4Ch mode(32kHz/12bits)
Frequency response: 20 Hz to 20 KHz +/-1.0dB/ 20 Hz to 14.5kHz +/-1.0dB
Dynamic range: More than 90 dB
Distortion(THD + N): Less than 0.05%(at 48 Khz)
Time code: Input/ Output > BNC x 1, EBU time code, 0.5 Vp-p to 18 Vp-p, 3k, unbalanced/ BNC x 1, EBU time code, 2.2 Vp-p, 75, unbalanced
RS-422A: 9-pin D-sub connector x 1, female x 1
Automatic DV format change
The DSR-1800P automatically detects DV, DVCAM and DVCPRO tape formats.
Playback of three sizes of DV, DVCAM and DVCPRO cassettes
The DV formats include not only DVCAM and DV but also the DVCPRO format. Three cassette sizes utilised for these formats. All these tapes can be played back in the DSR-1800P without any special mechanical adapter.
No need to dub up to other higher formats, which is often required on other DV VTRs
The editing functions such as digital slow motion, jog audio and DMC are all available for all DV tape formats. Superb jog audio lets you easily handle all the DV tape formats as direct editing sources. This means that, even when using DV or DVCPRO recorded tapes as editing sources, there is no need to dub to other, higher, formats.
The wide aspect ID (16:9) can be recorded or erased
Pictures recorded in a 16:9 aspect ratio include a wide aspect ID located in the VITC. The DSR-1800P can record or erase this ID. For example, if you don?t want this ID signal to appear on a TV display, this ID can be erased. If the video signal passes through an editing or effects system this ID signal is often removed. The DSR-1800P can re-record it.
Minimised video degradation
Due to a newly developed filter colour blurring during baseband dubbing (e.g. SDI or analogue component) has been significantly reduced.
Save editing time
Until now frame delays in all DV VTRs have made audio dubbing very difficult. However, due to newly developed digital processing and pre-read technology the DSR-1800P has achieved the perfect synchronisation of video and audio.
No Generator required to record a pre-striped tape
The DSR-1800P incorporates an internal signal generator. This generates either colour bars (100% or 75%) or black /burst signals for video and a 1 kHz tone or silence for audio. This function is convenient for recording a pre-striped tape prior to editing.
Easy to locate target point
The DSR-1800P incorporates a built-in Jog/Shuttle dial on its front panel. This enables highly responsive operation, especially when searching for editing points.
Channel condition indicator gives you piece of mind
For ensuring reliable editing conditions, the DSR-1800P is equipped with a channel condition monitoring function. Three levels of error rate are indicated with a tri-colour (G/Y/R) indicator. This is effective for all DV formats (25Mbps).
Playback capability of DV(25 Mb/s) format recorded tapes
The DSR-1800P has an excellent playback compatibility with all DV family formats (25 Mbps). This includes DVCPRO. Tapes of all these formats can be played back in the DSR-1800P without any special mechanical adapter or menu selection.
Excellent Digital Slow Motion
The DSR-1800P boasts excellent, noiseless, slow motion within the range of ?0.5 to +0.5 times normal playback speed, in increments of 1%. This range is effective for all DV formats (25Mbps) - DV, DVCAM and DVCPRO.
Excellent Digital Jog Sound
The DSR-1800P offers excellently smooth and clear performance of jog sound within the range of ?0.5 to +0.5 times normal playback speed, just like an analogue VTR. This allows easier searching for editing points especially within interviews. This is available for all DV formats (25Mbps) - DV, DVCAM and DVCPRO.
Improvement of multi-generation dubbing quality
Due to a newly developed filter colour blurring during baseband dubbing (e.g. SDI or analogue component) has been significantly reduced.
16:9 Aspect Ratio
Pictures recorded in a 16:9 aspect ratio include a wide aspect ID located in the VITC. The DSR-1800P can record or erase this ID. For example, if you don?t want this ID signal to appear on a TV display, this ID can be erased. If the video signal passes through an editing or effects system this ID signal is often removed. The DSR-1800P can re-record it.
Timecode
The DSR-1800P supports not only LTC timecode conforming to the EBU format but also Vertical Interval Time Code (VITC) through all video signal interfaces. VITC enables video and timecode signals to be copied with just a single BNC cable via either the composite or SDI interfaces. It also allows users to record other timecode data in the auxiliary data area of the VITC which is especially helpful for off-line editing.
ClipLink
The DSR-1800P supports the ClipLink function. Being integrated into a NLE system with Sony EditStations, the DSR-1800P plays an active role by sending the ClipLink information data onto the EditStations to provide great efficiency through the whole editing process. Also, the DSR-1800P has a capability of full tape dubbing with ClipLink Log Data either through i.LINK (option) or a combination of SDTI (QSDI) + RS-422A.
Internal Signal Generator
The DSR-1800P incorporates an internal signal generator. This generates either colour bars (100% or 75%) or black /burst signals for video and a 1 kHz tone or silence for audio. This function is convenient for recording a pre-striped tape prior to editing.
Reduction of mosaic noise in panning pictures
By improving the DCT motion detector, the DSR-1800P offers improvements in the picture quality especially when viewing panning pictures.
Picture quality in Slow motion
Employing the same Y-Add filter as that been used in Digital Betacam or Betacam SX VTRs, the DSR-1800P offers smooth digital slow motion picture by greatly reducing vertical jitter. This ability of the DSR-1800P is particularly apparent in the range of less than 0.5 times normal speed.
Auto Repeat function
The DSR-1800P has an Auto Repeat function that enables continuous playback between user defined IN and OUT points.
Collection and testing of kit before buying is always welcomed.
This equipment is located in GB
Manufacturer | Sony |
Model | 1800p |
Year | - |
Country | UK |
Condition | Good |
Main category | Broadcast, Film and Audio |
Subcategory | VTR (Video Tape Recorder) |
ID | P31001006 |
Client type | End User |
On Kitmondo since | 2013 |
Number of listings | 0 |
Country | UK |
Last activity | Oct. 1, 2013 |