Sony 9042QM

Listing description

CRT type 22 cm (9-inch) Trinitron tube monitor

7 pieces available

single piece: 350 EUR

complete set: 2 000 EUR

GENERAL

Colour system PAL/SECAM/NTSC/NTSC4.43

CRT type 22 cm (9-inch) Trinitron tube, viewable area 19.7 cm (8-inch) measured diagonally, 70° deflection, AG pitch 0.5 mm

Resolution Composite video: 250 TV lines at centre

Frequency response 6.0 MHz (-3 dB)

Aperture correction -4.0 dB to 6.0 dB (at 3.0 MHz)

Synchronization AFC time constant 1.0 ms

Normal scan 6 % overscan

Underscan 3 % underscan

H linearity Less than 5 % (typical)

V linearity Less than 5 % (typical)

Convergence Central: 0.43 mm (typical) Corner: 0.53 mm (typical)

Raster size stability H: 1.0 %, V: 1.5 %

HV regulation 3.0 % (cut off to high light)

Colour temperature D 65

Operating temperature 0 to 35° C (32 to 95° F)

Storage temperature -10 to 40° C (14° F to 104° F)

Humidity 0 to 90 % (no condensation)

Power requirements AC: 100 to 240 V, 0.7 to 0.4 A, 50/60 Hz DC: 12 V, 3.7 A

Power consumption AC: 43 W, DC: 40 W

INPUT

Video input

Line A/Line

Composite video: Loop-througn BNC

1 Vp-p ±6 dB, sync negative, automatic 75 © termination*2

Y/C:
Loop-through Mini DIN 4-pin

Y (luminance):

1 Vp-p ±6 dB, sync negative, automatic 75 © termination*2

C (chrominance):

NTSC: 0.286 Vp-p ±6 dB, automatic 75 © termination*2

PAL: 0.3 Vp-p ±6 dB, automatic 75 © termination*2

Line B

Composite video: Loop-trougn BNC

1 Vp-p ±6 dB, sync negative, automatic 75 © termination*2

RGB/COMPONENT (Y, R-Y, B-Y) BNC

Red/R-Y:

Non-composite: 0.7 Vp-p ±6 dB, sync positive, 75 ©

Sync on Green/Green/Y:

Composite: 1.0 Vp-p ±6 dB, sync negative

Non-composite: 0.7 Vp-p ±6 dB, sync positive, 75 ©

Blue/B-Y:

Non-composite: 0.7 Vp-p ±6 dB, sync positive, 75 ©

Audio input

Line A/Line
Loop-through Phono, -5 dBu, high impedance

Line B
Loop-through Phono, -5 dBu, high impedance

RGB/COMPONENT (Y, R-Y, B-Y) Phono, -5 dBu, high impedance

External sync
Loop-through BNC

4.0 Vp-p ±6 dB, sync negative, automatic 75 © termination*2

DC
XLR 4-pin

Remote
Mini DIN 8-pin (with Tally)

0 dBu = 0.775 V rms

*1 The Y/C input has priority over the Composite input.

*2 75 © termination is automatically set to OFF when a connection is made to the OUT connector.

OUTPUT

Speaker out

PHYSICAL CHARACTERISTICS

Mass Approx. 8.2 kg (18 lb) without batteries

Dimensions Approx. 217 (W) x 217 (H) x 352.5 (D) mm (8 5/8 x 8 5/8 x 14 inches)

This equipment is located in CZ