CNC Radial Forg SX-16

Listing description

Radial Forging Machine GFM mod. SX-16

Manufacturer:

GFM (Austria)
YOM:

1980
Numbers of Hammers:
4
Forging force:

800 Ton (200 t per Hammer)
Strokes per minute:
580
Hammer length:

320 mm
Maximum setting range is calculated diameter hammers – 100 mm
Maximum diameter of forging for structural steel:
circular cross section – Ø 160 mm
square cross section – 130 mm
Extreme quadrangle:
12 x 120 mm
Maximum length of forging:
6000 mm
Maximum diameter mounting the manipulator: 160 mm
Feed of manipulator A:
6800 mm
Feed of manipulator B:
7200 mm
Manipulators speed in fast moving: 400 mm/s
Feed speed of manipulators (steeples regulation): 10 ÷ 115 mm/s
Cooling water pressure:
3 ÷ 5 bar
Temperature of inlet water:
max. 30°C
Cooling water consumption:
34m3/h
Pipe diameter for cooling water: 2”
Compressed air pressure:
min. 5 bar
Pipe diameter for compressed air: Ø20 mm
Consumption of compressed air: 1,5 Nm3/h
Power supply (nominal power): 350 kW
Motor voltage:

500 V
Control voltage

220 V
Main engine Power:
200 kW
Power pump motors:
185 kW
Power manipulators motors:
2 x 22 kW

Dimensions of the machine:
Axis height of forging above the hall level:
750 mm
Maximum height of machine above the hall level: 2.050 mm
Maximum length of machine at the hall level:
33.740 mm
Foundation length:

34.200 mm

TO SEE VIDEO THE LINK:
https://www.youtube.com/watch?v=IbOxCubJ4M8

This equipment is located in PL