Edgebander SCM Edgebander SCM

Listing description

Edgebander SCM ME20 model
- Machines in stock
- Fully operational, ready to work
- Do not painted - Original paint
- A well-known renowned Italian SCM
- Year: 2007
Technical data:
- Working table dimensions: 1950x300 mm
- Working table height: 904 mm
- Min. / Max. edge thickness 0.4 / 2 mm
- Min. / Max. workpiece thickness: 10/45 mm
- Min. length / width of the workpiece: 180/65 mm
- Feed speed with independent motor: 5 m / min.
- Rotational speed of the cutter flat with tracers: 12000 rev. / Min.
- Diameter cutter widiowych (cutters flat): 70 mm Z4-15 °
- Obciagowych hole diameter 120 mm
- Operating temperature: 20-200 ° C
- Engine power feed: 0,18 kW
- Engine power band cutters flat: 0,37 kW
- Total weight: 270 kg
Standard equipment:
- Body of the machine consists of a steel monoblock, which provides stability and durability and ensures permanent regulations
- Electrical control panel is placed in the upper part of the machine, facilitating its use in all operating conditions
- Feeding table covered with a material to prevent scratches
- Front telescopic slide with rollers to maintain the surface 1950x550 mm
- Automatic feeding system rim roll with pneumatic knife off
- Powered and automatic feeding the periphery of the input member
- Automatic shut-off unit with pneumatic locking element to cut off the rim at the front and rear of
- 3 pressure rollers:
* 1 rubberised (fixed)
* 1 rubberised (oscillating)
* 1 nylon (fixed)
- Electrical enclosure with lockable main switch
- Electronic control of temperature glue, glue temperature decrease to 150 ° with a momentary stop the machine, which prevents scorched glue (fast reboot).
- Digital temperature readout
- Aluminum tank adhesive 5 parts heating the adhesive, providing a uniform temperature in the tank, micrometer adjustment amount of glue on the roller distributor (knob) autoregulation projection roller cementing depending on the height plate
- Top and bottom milling unit for milling przestajacego the periphery of the top and bottom fitted with a chrome shoes Duplicators
- Digital readouts to adjust the cutter
- A magazine on the periphery of the roll-shaped plate with a diameter of 730 mm
- Feed system through the upper plate feeder driven
- Height-adjustable by the dial plate with digital readout, automatic setting of aggregates, depending on the desired height
- A centralized system of ciagowy, nozzle with a diameter of 120 mm
- A filter for long waste
- Limiter on the output of anodized aluminum
- Set to edge processing to a thickness of 2 mm equipped with:
- 4 pairs of rollers in the table
- Adjustable guide at the entrance with digital readout
- The heads 75 mm profile for R = 2 mm
- Adjustable first pressure roller
MACHINE DIMENSIONS:
Length: 2000mm
Width: 600 mm
Height: 1300 mm

This equipment is located in PL