-
Machinery
Choose from 20,248 used machinery listings
- Auctions
- Sell machines
- Sell complete plants
- What is Kitmondo?
- About us
- Blog
Overview
LEITCH Audio Video Synchronizer SD X75-DPS-575AV
Features
• SDTV and HDTV versions
• Upgradable from SDTV to HDTV
• Saves space by providing synchronization, processing amplifiers, up/down/cross-conversions, 8-, 16- or 32- channel audio processing, Dolby® E and Dolby Digital® (AC-3) compression and decompression in a 1RU package
• Simplifies operations via networked control
• Improves monitoring via streaming capabilities
• Increases format flexibility by handling analog, digital, and high definition video signals with optional embedded, analog, digital and compressed audio processing
• Enhances I/O capability via HDTV optical and DVI-D interfaces
• Enhances troubleshooting and maintenance capabilities via enhanced alarm, auto switchover and industry standard SNMP functionality.
Specifications
Video Specifications
HD-SDI Video Input
Standard SMPTE292M
Connector BNC (IEC169-8)
Impedance 75 ohms
Return loss >18 dB, typical, from 5 MHz to 1485 MHz
Equalization Adaptive cable equalization for up to—
388 ft (100 m), typical, of Belden 8281 co-axial cable or
492 ft (150 m), typical, of Belden 1694A co-axial cable
HDTV Fiber Video Input
Standard SMPTE 292M, Mode B Operation
Number of inputs 1
Connector Single mode fiber, SC connector standard (FC or ST type optional)
Input wavelength 1200 to 1600 nm
Max. input power 0 dBm, typical
Sensitivity Better than -20 dBm
SD-SDI Video Input
Standard SMPTE259M-C, 270 Mbps, 525/625 component
Connector BNC (IE C169-8)
Impedance 75 ohms
Return loss >18 dB from 5 MHz to 270 MHz
Equalization >23 dB Belden 8281 cable
S-Video Input
Standard NTSC, PAL-M. PAL-B
Connector 4-pin DIN
Composite Video Input
Standard NTSC (SMPTE170M), PAL-B (ITU624-2), SECAM. PAL-M
Connector BNC (IEC 169-8)
Quantization Normal mode (Non-TBC)
NTSC, PAL-B, PAL-M : 12 bits
Secam : 8 bits
TBC mode
All are 8 bits
Input level 1.0 V pk-to-pk
Impedance 75 ohms
Return loss >40 dB, 0.1 MHz to 6 MHz
Common mode range 5.0 V
CMRR 60 dB @ 50/60 Hz, 5 V pk-to-pk
Setup level range ±7.5 IRE
Frequency response ±0.1 dB, 0.1 MHz to 6 MHz
SNR 62 dB, typical
Y/C gain error < 0.1 dB
Y/C delay error <10 ns
Component Input
Format Betacam
Connector BNC (IEC169-8)
Input level 1.0 V pk-to-pk
Quantization Normal mode (Non-TBC)
CAV
Y: 12 bits
Cb: 10 bits
Cr: 10 bits
S-Video
Luma : 12 bits
Chroma: 10 bits
TBC mode
CAV: Not supported
S-Video : 8 bits all
Impedance 75 ohms
Return loss >40 dB, 1 kHz to 6 MHz
Frequency response Y: ±0.15 dB to 5.5 MHz
Pb/Pr: ±0.10 dB to 3.0 MHz
SNR >60 dB
Genlock Input
Connector BNC (IEC169-8)
Impedance 75 ohms
Return loss >40 dB, 0.1 MHz to 6 MHz
Input level 1 V pk-to-pk, -5.0 dB to +6.0 dB for NTSC/PAL-B
1 Vpk-to-pk, -3.5 dB to +6.0 dB for Tri-level sync (1080i/720p)
Signal type NTSC/PAL-B analog composite
±300 mV Tri-level sync (1080i/720p)
HD-SDI Video Output
Standard SMPTE292M
Connector BNC (IEC169-8)
Impedance 75 ohms
Return loss >18 dB, typical, from 5 MHz to 1485 MHz
Signal level 800 mV ± 10%
DC offset 0.0 V ± 0.5 V
Rise/fall time <270 ps
Overshoot <10% of amplitude
Jitter <135 ps pk-to-pk
HDTV Fiber Video Output
Standard SMPTE 292M, Mode B Operation
Number of outputs 1
Connector Single mode fiber, SC/FC/ST type (as per customer order)
Output wavelength 1310 ± 40 nm
Output power -7 dBm
Rise/fall time <270 ps
Jitter <135 ps pk-to-pk
Laser safety level Class 1
SD-SDI Video Output
Standard SMPTE259M-C, 270 Mbps, 525/625 component
Quantization 10 bits
Connector BNC (IEC169-8)
Impedance 75 ohms
Return loss >18 dB from 5 MHz to 270 MHz
Signal level 800 mV ± 10%
DC offset 0.0 ± 0.5 V
Rise/fall time 400 ps to 1500 ps (20% to 80%)
Overshoot <10%
Jitter <0.2 UI (pk-to-pk)
Composite Video Output
Standard NTSC, PAL-B, PAL-M
Connector BNC (IEC169-8)
Quantization 12 bits
Impedance 75 ohms
Return loss >40 dB (0.1 MHz to 6 MHz)
Frequency response ±0.1 dB (0.1 MHz to 6 MHz)
DC offset <0.0 ± 0.005 V
Differential gain <0.5%
Differential phase <0.5°
Y/C delay <1 ns
Transient response < 0.5% K Factor
SNR >63 dB (0.1 MHz to 6 MHz)
Component Output
Format Betacam
Connector BNC (IEC169-8)
Quantization Y: 12 bits
Cb: 10 bits
Cr: 10 bits
GBR: 8 bits
Impedance 75 ohms
Return loss >40 dB (1 kHz to 6 MHz)
Frequency response Y: ±0.1 dB to 5.5 MHz
Pb/Pr: ±0.10 dB to 3.0 MHz
DC offset <0.0 ± 5 mV
Relative delay <±1 ns
SNR >63 dB
Streaming Output
Connector RJ-45
Standard MPEG4
DVI Output
Standard 1080p/29.97, 1080i/29.97, 1080i/25, 720p/59.97, 720p/50, 480i/29.97, 576i/25
Connector DVI-D
Rise/fall times 75 ps to 0.4 UI (20% to 80%)
Level 1.0 V ± 0.2 V (differential, pk-to-pk)
Jitter 0.25 UI
Audio Specifications
AES/DARS Input
Balanced
Standard AES3
Type Balanced, transformer coupled
Connector 2 female DB-26/DB-44 connector with breakout cable
Sensitivity <200 mV
Impedance 110 ohms ± 20% (0.1 MHz to 6 MHz)
Common mode rejection 0 V to 7 V (0 kHz to 20 kHz)
Input audio rate 32 kHz to 108 kHz
Unbalanced
Standard AES3, SMPTE276M
Type Unbalanced, AC coupled
Connector BNC (IEC169-8)
Sensitivity <100 mV
Impedance 75 ohms
Return loss >25 dB, 0.1MHz to 6 MHz
Input audio rate 32 kHz to 108 kHz
Analog Audio Input
Connector Removable barrier strip
Input impedance Jumper selectable with J5-J8
Pin 2-3: 100 k ohms
Pin 1-2: 600 ohms
Input analog level 28 dBu to 16 dBu (adjustable by 2 dB increments)
CMRR >80 dB @ 60 Hz, typical
Linearity <±0.5 dB (to -100 dBFS)
Frequency response <±0.05 dB (20 Hz to 20 kHz), typical
THD >100 dB (@ -1 dBFS, 20 Hz to 20 KHz)
SNR >100 dB
AES Output
Balanced
Standard AES3
Type Balanced, transformer coupled
Connector 2 female DB-26/DB-44 connector with breakout cable
Signal level 4.0 V (pk-to-pk)
Impedance 110 ohms ± 20% (0.1 MHz to 6 MHz)
Jitter <± 4 ns, peak value
DC offset 0.0 ± 50 mV
Rise/fall time 5 ns to 30 ns (10% to 90%)
Unbalanced
Standard AES3, SMPTE276M
Type Unbalanced, AC coupled
Connector BNC (IEC169-8)
Signal level 1.0 V ± 10% (pk-to-pk)
Impedance 75 ohms
Return loss >25 dB, 0.1 MHz to 6 MHz
Jitter <± 4 ns, peak value
DC offset 0.0 ± 50 mV
Rise/fall time 30 ns to 44 ns (10% to 90%)
Analog Audio Output
Connector Removable barrier strip
Output impedance Jumper selectable with J1-J4, J9-J12
Pin 2-3: 66 ohms
Pin 1-2: 600 ohms
Output analog level 28 dBu to 16 dBu (adjustable by 2 dB increments)
Linearity <±0.5 dB (to -100 dBFS)
Frequency response <±0.1dB (20 Hz to 20 kHz)
THD <-8> dB (@ -1 dBFS, 20 Hz to 20 KHz), typical
SNR >100 dB
I/O Specifications
Multi-I/O
Composite output NTSC, PAL-B, SECAM, Sync
Component output GBR
GPI inputs Number: 2
Internally pulled HIGH
External contact closure to ground to trigger
GPI outputs Number: 2
TTL- compatible
75 ohms impedance
Sink 64 mA, source 32 mA
Connector DB-26
DV I/O
Standard IEEE-1394
Connector IEEE-1394, 6 pin molex connector
Control/Streaming I/O
Connector RJ-45
Protocols EP, DCN, SNMP, HTTP
Communication
RS-232/RS-422
Standard Electrical specification EIA-232C
Connector DB-9
232/422 switchable
422 termination can be selected from the menu
Hardware
Weight and Dimension Measurements
Weight Fully loaded unit, no power cords: 11 lbs (4.9 kg)
Breakout cables (each): 2.5 lbs (1.1 kg)
Height 1RU, 1.75 in. (4.5 cm)
Width 19 in. (48.3 cm)
Technical Details
LEITCH Audio Video Synchronizer SD X75-DPS-575AV
Features
• SDTV and HDTV versions
• Upgradable from SDTV to HDTV
This equipment is located in AE
Manufacturer | Leitch |
Model | X75-DPS-575AV A |
Year | - |
Country | UAE |
Condition | Good |
Main category | Broadcast, Film and Audio |
Subcategory | Other Broadcast Equipment, Film & Audio |
ID | P80910035 |
Client type | Machinery dealer |
On Kitmondo since | 2017 |
Number of listings | 0 |
Country | UAE |
Employees | 1 - 10 |
Established | 2016 |
Company description |
UAE’s only one-stop shop for used and refurbished broadcasting equipment. Home to the only inventory of used, refurbished and demo equipment in the Middle East, we buy and sell high-quality used b… read more UAE’s only one-stop shop for used and refurbished broadcasting equipment. Home to the only inventory of used, refurbished and demo equipment in the Middle East, we buy and sell high-quality used broadcast and AV equipment to radio and TV customers primarily in the Gulf as well as other parts of the word. We source our equipment from premier broadcasters in the region and employ an efficient team of engineers to refurbish and service the gear we have acquired before selling them. All used broadcast equipment comes with a three-month warranty.
We have successfully provided integrated solutions and equipment to end users in U.AE, Egypt, India, Jordan, Pakistan, Afghanistan, the Philippines and Turkey. Having established a firm foothold in the Middle East and Asia, BSBroadcast is constantly looking to extend its portfolio of equipment and solutions through partnerships with leading European and American used equipment dealers The Ceo, who has worked in MENA region to build broadcast facilities from scratch, established BS Broadcast in 2016. On this journey, the CEO identified a need among customers for revamped and restored equipment at lower costs. Additionally, he has been active in the Middle East and South Asian broadcasting industry since 1999 and has developed a vast network of contacts that came with requirements for used equipment.
In essence, the company was born out of these demands and presently serves customers worldwide. Having a base in the UAE has helped facilitate easy shipment across the globe.
Our inventory includes an extensive range of 3G/HD/SD equipment including playout servers, satellite antennae and terminals, RF modulators, frequency converters, multiplexers, HPA, SPG, waveform monitors, up-converters, routers and switchers, and more from the world’s leading manufacturers. Whether rotating out your existing equipment, or clearing out your storage area, bsbroadcast.com can assist you in securing maximum value for your investments. Should you want a quote for your used systems cameras, broadcast lenses, mixers or SR decks, please contact our trade sales team. |
Last activity | Feb. 1, 2022 |