OMC Press - OMC - A

Listing description

DOUBLE MEMBRANE PRESS WITH LOAD/UNLOAD
• Brand: Omc
• Model: Airtec double, CE
• Conditions: Tested and functioning
• Delivery: Ready

Description: Double air membrane press to cover two side raised panels with veneer or paper in one go
Structure entirely made of welded and tool machined beams. Hydraulic system: the rams are thickness chromed to grant a perfect flowing and a higher working life either of the seal gaskets and of the piston itself. All the cylinders are bolted to the structure, so to be easily removed in case of servicing. Highly reliable hydraulic power unit fitted with a double stage pump, first stage a low pressure and high delivery to move up the platen, second stage at high pressure and low delivery to get the working pressure set by the operator on the keyboard. Hydraulic power unit motor plunged in oil bath to get a better cooling and to reduce noise, and further more to avoid any possible damages caused by accidental shocks. Electric system: general switch board from where the operator can set and use all the functions of the press.
Covering needs:
• Cold press for single or piled up 400mm.
• Hot press either for the composition or covering of solid doors, flush doors and panels with indipendent adjustable temperature for the upper and lower platen up to 150°C
• 3-4) Press to cover routed panels by PVC or Veneer
• 5) Double membrane press to cover two side raised panels with veneer or paper in one go
Technical Features:
• Double rack system to guarantee a perfect platen movement. Nr. 2 groups on the length and nr. 2 groups on the width connected between them by a torsion bar.
• Device to shut off one or more sets of pistons.
• Lift look
• Matal safety covers
• Renforced lower cylinders plates
• Cylinders thrust plates

• Easy access hydraulics
• Leveling bolts
• Heating system
• Electric boiler for thermal oil
• Limit switch for press opening
• Perimeter E-stop system
• Control board with Touch Screen
• Platen size: 2900 x 1400 mm.
• Cylinders: nr. 8
• Pistons: diam. 135 mm.
• Vacuum pump: nr. 1
• Overall dimensions: 4500 x 3500 mm.
• Machine weight KG 11.000
• Documents: operation and maintenance manual, spare parts catalogue, electrical sheet, software manual, CE declaration of conformity

This equipment is located in IT