Optimizing OWD Optimizing OWD

Listing description

Optimizing OWD 1500 METAL Technica
- Machines in stock
- After reconditioned
- State vg
- Year 2011
Performance 3000-6500 mb. / 8h
The control unit with touch screen display color "MITSHUBISHI"
FEATURES
- Full optimization of the 30 dimensions of the genre and
30 dimensions of second grade + dimension pozaklasowy
-cutting On the crayon fluorescencyjna- cut at Selection
-Obcinanie Marginesu- the beginning and end of the board
-cutting Pakietami- several items at once
-counters Metrów- Total, manager of I and II changes, operator,
-Receptury- 2000 sets of dimensions
-Dokladnosc Cutting + - 0.2 mm
Source Engine 5,5KW cutting (saw Ø500 - 140z)
Width 12 - 200 mm max. w. / h. (200/55 mm)
Height 12 - 85 mm max. h. / w. (85 / 130mm)
Oil Lubrication central lubrication of all linear bearings
The length of the mat. Min.800 batch max. 6500mm
Control and optimization program is installed in the memory of the industrial controller and displayed large and clear touch panel (the ability to use while wearing gloves) allows you to control all functions of the machine from one place.
The following describes the basic functions of the program allow for:
1. A complete optimization of 30 dimensions and species, 30 species + dimensions of the second dimension pozaklasowy
2. Adjustable parameters optimization
a. Setting priorities: length (or in the first place factored in
b. The order (if we cut the order to the list of cuts)
c. Minimum or short waste (ie, for which the length of the waste we agree)
d. The most important dimensions (type in how many dimensions the list has a program has
e. The ability to declare the maximum length of the waste.
f. Setting the machine if cut off from the front and end boards and whether it can do so.
g. The test optimization (allows you to check how in specific settings
3. Writing recipes (the ability to save a few thousand recipes). The recipe is
stored on the memory card parameters that are needed to operate the machine at a given instance. article (ie. the length of the elements, number of pieces to be performed, the place nailing elements, speeds saws, saws ejection speed, etc.).
4. Segregation cut elements - assigning individual dimensions to specific zbijaków, the batter into the alternating (useful for short items), nailing two zbijakami at a time (useful for long parts)
5. Optimize the cutting defect (marked in crayon fluorescent).
6. Optimization without cutting defects.
7. Fixed dimensions (ie. A simple optimization)
8. Meters meters. (Quantity of running meters of material that machine-cut during use (niekasowalny), the manager on duty I and II, the operator, the longest monthly optimization elements and then getting shorter), optimized in the first place)
We will slot machine material (without cutting the material) is also used to validate the sensor settings of the machine)

This equipment is located in PL