SONY LMD-2050W 20-in

Listing description

Overview

Sony 20-inch Widescreen Multi-format LCD Monitor LMD-2050W

Features

• WFM and Audio* Level Meter Windows * Only embedded audio is supported.
• Picture by Picture mode
• H/V Delay Function
• ACC Off
• DC Operation
• Setup Level for Analogue Component and NTSC signals
• Sub Control buttons for adjusting Contrast, Chroma, Phase and Brightness
• Blue-Only Mode
• Monochrome Mode
• Auto Chroma/Phase Setup
• Remote (Ethernet, RS-232C, Parallel Remote)
• DVI-D Input
• Power-saving Function (computer input only)
• DCC-2B

Specifications
Type A-Si TFT Active Matrix LCD
Resolution 1680 x1050 pixels (WSXGA+)
Picture Size (H x W) (Viewable area) (Diagonal) Approx. 433.5 x 272.9 mm
(Approx. 17 1/8 x 10 3/4 inches)
Approx. 511.1 mm (20 1/8 inches)
Aspect 16:10
colours Approx 16,777,216 colours (8bits)
Viewing Angle 89°/89°/89°/89° (typical) (up/down/left/right contrast>10:1)
Composite BNC x 1, 1.0 VP-p ±3dB sync negative
Y/C 4pin Mini DIN x 1
Y: 1.0 Vp-p ± 3dB sync negative
C: 0.286 Vp-p ± 3dB (NTSC burst signal level), 0.3 Vp-p ± 3dB (PAL burst signal level)
RGB, Component BNC x 3
RGB : 0.7 Vp-p ± 3dB (Sync On Green, 0.3 Vp-p sync negative)
Component : 0.7 Vp-p ± 3dB (75% chrominance standard colour bar signal)
External Sync BNC x 1
0.3 to 4.0 Vp-p ± bipolarity ternary or negative polarity binary
Audio RCA pin x 2 (L, R) -5 dBu 47 k ohms or higher
HD15 D-sub 15 pin x 1
R/G/B: 0.7 Vp-p sync positive (Sync On Green, 0.3 Vp-p sync negative)
Sync : Total level (polarity free, H/V separate and composite sync)
Plug & Play function : corresponds to DDC-2B
DVI TMDS signal link
Parallel remote Modular connector 8 pin x 1 (pin assignment at users' allocation)
Serial remote (LAN) D-sub 9-pin (RS232C) x 1
RJ-45 modular connector (ETHERNET) x 1 (10BASE-T/100BASE-TX)
DC in XLR type 4pin x 1 DC24V (output impedance 0.005 ohms or less)
Optional Option input slot, 2 slots (for HD-SDI, SDI capability and extra analogue I/O's)
Composite BNC x 1, 1.0 VP-p ±3dB sync negative
Y/C 4pin Mini DIN x 1
Y: 1.0 Vp-p ± 3dB sync negative
C: 0.286 Vp-p ± 3dB (NTSC burst signal level), 0.3 Vp-p ± 3dB (PAL burst signal level)
RGB, Component BNC x 3
RGB : 0.7 Vp-p ± 3dB (Sync On Green, 0.3 Vp-p sync negative)
Component : 0.7 Vp-p ± 3dB (75% chrominance standard colour bar signal)
Storage & Transport Humidity 0 to 90 %
Operating/Storage/Trans. Pressure 700 to 1060 hPa
Dimensions (W x H x D) Dimension 518.5 x 468.4 x 269.9 mm (20 1/2 x 18 1/2 x 10 3/4 inch) Dimension without stand 518.5 x 328.7 x 104.7 mm (20 1/2 x 13 x 4 1/8 inch)
Display Stand (W x H x D) 320.0 x 361.5 x 269.9 mm (12 5/8 x 14 1/4 x 10 3/4 inches)
Mass With two option boards Approx. 10.5 kg ( 23 lb 2 oz) with BKM-229X x 2 Without option boards Approx. 10.1 kg ( 22 lb 4 oz)
Power Requirement AC100V to 240V 50/60Hz 0.4A to 0.8A, DC24V 3.3A
Power Consumption Maximum Approx. 95 W (with 2 x BKM-229X)
Operating Temperature 0 to 35 °C (recommended operation temperature 20 to 30 °C)
Operating Humidity 30 to 85% (No condensation)
Storage & Transport Temperature -20 to 60 °C
AC power cord
Table stand

20-inch Widescreen Multi-format LCD Monitor

This equipment is located in AE