Specifications

Nr. of colours 2
Width 330 mm
Laminating Yes
Rewinder Yes
-------------------
Worked hours
Hours under power
State as-is, where-is
At local norms ---------
Status
Datasheet ABG Omega Digicon 2

Description

Printing Presses > Flexographic Label Printing Machines

Complete overhauled

Machine built to work right to left

Unwind - 700 mm unwind, electronic web guide (edge guide sensor), splice table and web clamps, auto brake tension control.

Corona treatment Vetaphone

Infeed nip drive section, infeed dancer.

Delam/relam module for printing on adhesive in either full or semi-rotary section with Air

assist turn bar

1st Semi rotary flexographic printing station with quick change cassette comprising

stainless steel ink pan, pick-up roller, ceramic anilox roller, and reverse angle doctor blade.

The station has auto pre-positioning and servo drive re-register

GEW air-cooled UV curing unit 140w/cm

2nd Semi rotary flexographic printing station with quick change cassette comprising

stainless steel ink pan, pick-up roller, ceramic anilox roller, and reverse angle doctor blade.

The station has auto pre-positioning and servo drive re-register

GEW air-cooled UV curing unit 140w/cm

Over laminating station suitable for super varnish, cold foil, self-wound and lamination

with carrier with soft laminating option

Mid-press dancer to allow full rotary coating

Semi rotary die cutting station with 25,5” magnetic cylinder (24” maximum repeat).

Outfeed nip drive section, outfeed dancer.

Waste matrix stripping (maximum diameter 600mm)

Rewind

Scissor slitting, including 5 knives and removable knife shafts

Back Scorer used for edge trimming the silicon carrier

Single spindle rewind with variable tension control, 76mm air expanding shaft

label length counter with batch and pause facility

Second rewind shaft with 76mm shaft

Maximum web width: 330 mm

Minimum web width: 180mm

Maximum repeat length: 24” (609,6 mm)

Minimum repeat length: 2” (50,8 mm)

Rewind maximum diameter: 500 mm

Print cylinder: 25,5”

Coating cylinder: 320 mm

Flexo plate: 1,7mm

Tape 0,38 mm

Anilox 1 400LPI 6,4cm3/m2

Anilox 2 400LPI 6,4cm3/m2

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type Consultant
Active since 2020
Offers online 218
Last activity Feb. 1, 2025

Description

Printing Presses > Flexographic Label Printing Machines

Complete overhauled

Machine built to work right to left

Unwind - 700 mm unwind, electronic web guide (edge guide sensor), splice table and web clamps, auto brake tension control.

Corona treatment Vetaphone

Infeed nip drive section, infeed dancer.

Delam/relam module for printing on adhesive in either full or semi-rotary section with Air

assist turn bar

1st Semi rotary flexographic printing station with quick change cassette comprising

stainless steel ink pan, pick-up roller, ceramic anilox roller, and reverse angle doctor blade.

The station has auto pre-positioning and servo drive re-register

GEW air-cooled UV curing unit 140w/cm

2nd Semi rotary flexographic printing station with quick change cassette comprising

stainless steel ink pan, pick-up roller, ceramic anilox roller, and reverse angle doctor blade.

The station has auto pre-positioning and servo drive re-register

GEW air-cooled UV curing unit 140w/cm

Over laminating station suitable for super varnish, cold foil, self-wound and lamination

with carrier with soft laminating option

Mid-press dancer to allow full rotary coating

Semi rotary die cutting station with 25,5” magnetic cylinder (24” maximum repeat).

Outfeed nip drive section, outfeed dancer.

Waste matrix stripping (maximum diameter 600mm)

Rewind

Scissor slitting, including 5 knives and removable knife shafts

Back Scorer used for edge trimming the silicon carrier

Single spindle rewind with variable tension control, 76mm air expanding shaft

label length counter with batch and pause facility

Second rewind shaft with 76mm shaft

Maximum web width: 330 mm

Minimum web width: 180mm

Maximum repeat length: 24” (609,6 mm)

Minimum repeat length: 2” (50,8 mm)

Rewind maximum diameter: 500 mm

Print cylinder: 25,5”

Coating cylinder: 320 mm

Flexo plate: 1,7mm

Tape 0,38 mm

Anilox 1 400LPI 6,4cm3/m2

Anilox 2 400LPI 6,4cm3/m2

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Specifications

Nr. of colours 2
Width 330 mm
Laminating Yes
Rewinder Yes
-------------------
Worked hours
Hours under power
State as-is, where-is
At local norms ---------
Status

About this seller

Client type Consultant
Active since 2020
Offers online 218
Last activity Feb. 1, 2025

Here is a selection of similar machines

ABG Omega Digicon 2 - Flexographic Label Printing Machines