Specifications

Collecting capacity 48000 m³/h
Nbr of bags 198
Fan Yes
Fan engine 75 kW
Engine power 75 kW
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status visible

Description

GENERAL WORKING PRINCIPLE FOR JET-PULSE BAG FILTERS
Dusty air or gas in pressure or vacuum enters the system under the filter housing. The air
(gas) movement is in the direction of the filter bags and carries dust particles to the outside of the bag.
surface of the bag cage. Fresh air passing into the inner part of the bag cage passes through the venturi section
reaches the clean compartment of the filter unit, from where it leaves the unit through the exhaust system.
During the dust collection operation phase, the dust collects on the outer surface of the filter element.
Therefore, the permeability (porosity) of the filter element decreases.
Differential pressure control and increase between the clean and dirty gas sections of the filter
monitoring and differential pressure difference by activating the compressed air reverse cleaning system
The bag permeability is reduced and the bag permeability is constantly kept within the limits.
With periodic signals from the electronic timer circuit, the solenoid valves are controlled for 0. 1 sec.
energized for very short adjustable periods of time and high pressure air pulse valves
is sent to the blowing pipes. Compressed air through the holes on the blow pipes
is sprayed into the venturi at very high speed. High velocity compressed air is blown through the venturi
As it passes through, it creates a secondary air several times the size of its own volume.
In other words, compressed air sprayed through the venturi at very high pressure and speed
is pumped into the bag along with the air from the fresh air compartment.
very sudden and short pressure increase in the clean section of the filter cylinder due to the combined effect
comes in. This results in reverse air flow between the fibers of the filter element and therefore in sufficient
it causes it to be cleansed.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type Reseller
Active since 2022
Offers online 11
Last activity Dec. 16, 2024

Description

GENERAL WORKING PRINCIPLE FOR JET-PULSE BAG FILTERS
Dusty air or gas in pressure or vacuum enters the system under the filter housing. The air
(gas) movement is in the direction of the filter bags and carries dust particles to the outside of the bag.
surface of the bag cage. Fresh air passing into the inner part of the bag cage passes through the venturi section
reaches the clean compartment of the filter unit, from where it leaves the unit through the exhaust system.
During the dust collection operation phase, the dust collects on the outer surface of the filter element.
Therefore, the permeability (porosity) of the filter element decreases.
Differential pressure control and increase between the clean and dirty gas sections of the filter
monitoring and differential pressure difference by activating the compressed air reverse cleaning system
The bag permeability is reduced and the bag permeability is constantly kept within the limits.
With periodic signals from the electronic timer circuit, the solenoid valves are controlled for 0. 1 sec.
energized for very short adjustable periods of time and high pressure air pulse valves
is sent to the blowing pipes. Compressed air through the holes on the blow pipes
is sprayed into the venturi at very high speed. High velocity compressed air is blown through the venturi
As it passes through, it creates a secondary air several times the size of its own volume.
In other words, compressed air sprayed through the venturi at very high pressure and speed
is pumped into the bag along with the air from the fresh air compartment.
very sudden and short pressure increase in the clean section of the filter cylinder due to the combined effect
comes in. This results in reverse air flow between the fibers of the filter element and therefore in sufficient
it causes it to be cleansed.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Specifications

Collecting capacity 48000 m³/h
Nbr of bags 198
Fan Yes
Fan engine 75 kW
Engine power 75 kW
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status visible

About this seller

Client type Reseller
Active since 2022
Offers online 11
Last activity Dec. 16, 2024

Here is a selection of similar machines

ALFER ALFER JET-PULS 48.000 M3 Dust collector