Specifications

Max. boring Ø 32 mm
Workpiece length 1600 mm
Centre height 1200 mm
Spindle speed 8000 rpm
Engine power 30 kW
-------------------
Length x width x height 5500.0 × 5300.0 × 3400.0
Weight 15000 kg
Worked hours
Hours under power
State good
At local norms ---------
Status

Description

AUERBACH AX3 TLF deep hole machining center built in 2011 in Germany by Erste Maschinen Fabrik (ERMAFA Sondermaschinen- und Anlagenbau GmbH). The AUERBACH AC3 TLF center is designed for making very precise, deep holes with high tolerance in various types of metals. The fully automatic AUERBACH AX-3 TLF deep-hole drilling and milling machine, characterized by high reliability and efficiency, guarantees the optimization of all aspects of the machining process and a significant reduction in cycle time.

The AUERBACH AX 3 TLF deep drilling machining center equipped with 6 axes (X, Z, W, Y, B, A) allows you to obtain holes with a maximum diameter of 32 mm and a depth of up to 1700 mm. All process parameters are programmed in the convenient HEIDENHAIN iTNC 530 CNC control. The total weight of the machine is 15,000 kg.

Technical data of the AUERBACH AX3 TLF deep hole drilling and milling machine

- CNC controller: HEIDENHAIN iTNC 530
- range of deep drilling diameters: 3-32 mm
- drilling depth in one pass (without support): 1300 mm
- maximum possible drilling depth: 1700 mm
- longitudinal travel (X axis) table: 1600 mm
- cross travel (Z axis) column: 700 mm
- transverse travel (W axis) drilling head: 1300 mm
- vertical travel (Y axis) drilling head: 800-1200 mm
- rotary axis (axis B) rotary table: 360°
- rotary axis (axis A) drilling head: -25°/+15°
- feed speed: 1-15 m / min (in the Y axis: 1-10 m / min)
- rapid feed speed in all axes: 15 m / min (in the Y axis: 10 m / min)
- spindle speed range: 60-8000 rpm
- spindle torque (100% ED, S1): 115 Nm
- tool holder: HSK63
- tool clamp: OTT tool post
- nominal power of the main drive (100% ED, S1/40% ED, S6): 12/18.5 kW
- engine power: 30 kW
- coolant tank capacity: 800 l
- maximum coolant pressure: 100 bar
- ambient temperature range: +5°C / +40°C
- power supply: 3x 400V; 50 Hz
- space requirement (L x W x H): 5500 x 5300 x 3400 mm
- machine weight AUERBACH AX3 TLF: 15000 kg

Equipment of the AUERBACH AX3 TLF drilling and milling machine

- 1500 x 100 mm rotary table, interpolated with limited play
- tilting drilling head +15°/-25°
- head for drilling shafts
- HR520 handwheel
- steady rests (2 pcs.)
- adjustable coolant nozzles
- oil cooling
- electrical cabinet cooling device
- closed top cover (roof)

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type Reseller
Active since 2010
Offers online 340
Last activity Nov. 21, 2024

Description

AUERBACH AX3 TLF deep hole machining center built in 2011 in Germany by Erste Maschinen Fabrik (ERMAFA Sondermaschinen- und Anlagenbau GmbH). The AUERBACH AC3 TLF center is designed for making very precise, deep holes with high tolerance in various types of metals. The fully automatic AUERBACH AX-3 TLF deep-hole drilling and milling machine, characterized by high reliability and efficiency, guarantees the optimization of all aspects of the machining process and a significant reduction in cycle time.

The AUERBACH AX 3 TLF deep drilling machining center equipped with 6 axes (X, Z, W, Y, B, A) allows you to obtain holes with a maximum diameter of 32 mm and a depth of up to 1700 mm. All process parameters are programmed in the convenient HEIDENHAIN iTNC 530 CNC control. The total weight of the machine is 15,000 kg.

Technical data of the AUERBACH AX3 TLF deep hole drilling and milling machine

- CNC controller: HEIDENHAIN iTNC 530
- range of deep drilling diameters: 3-32 mm
- drilling depth in one pass (without support): 1300 mm
- maximum possible drilling depth: 1700 mm
- longitudinal travel (X axis) table: 1600 mm
- cross travel (Z axis) column: 700 mm
- transverse travel (W axis) drilling head: 1300 mm
- vertical travel (Y axis) drilling head: 800-1200 mm
- rotary axis (axis B) rotary table: 360°
- rotary axis (axis A) drilling head: -25°/+15°
- feed speed: 1-15 m / min (in the Y axis: 1-10 m / min)
- rapid feed speed in all axes: 15 m / min (in the Y axis: 10 m / min)
- spindle speed range: 60-8000 rpm
- spindle torque (100% ED, S1): 115 Nm
- tool holder: HSK63
- tool clamp: OTT tool post
- nominal power of the main drive (100% ED, S1/40% ED, S6): 12/18.5 kW
- engine power: 30 kW
- coolant tank capacity: 800 l
- maximum coolant pressure: 100 bar
- ambient temperature range: +5°C / +40°C
- power supply: 3x 400V; 50 Hz
- space requirement (L x W x H): 5500 x 5300 x 3400 mm
- machine weight AUERBACH AX3 TLF: 15000 kg

Equipment of the AUERBACH AX3 TLF drilling and milling machine

- 1500 x 100 mm rotary table, interpolated with limited play
- tilting drilling head +15°/-25°
- head for drilling shafts
- HR520 handwheel
- steady rests (2 pcs.)
- adjustable coolant nozzles
- oil cooling
- electrical cabinet cooling device
- closed top cover (roof)

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Specifications

Max. boring Ø 32 mm
Workpiece length 1600 mm
Centre height 1200 mm
Spindle speed 8000 rpm
Engine power 30 kW
-------------------
Length x width x height 5500.0 × 5300.0 × 3400.0
Weight 15000 kg
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2010
Offers online 340
Last activity Nov. 21, 2024

Here is a selection of similar machines

Auerbach AX3 TLF Deep hole drilling machine