AXA DBZ Machining center - vertical Top seller

Description

Machine in good technical condition, possibility of testing after agreement.
In 2015, GO spindles took place.
In October 2023, the tool magazine motor was replaced.
In 2011, a license for the DXF software option was purchased - import for iTNC.
Motorcycle watches. power on time : 57676.
Heidenhain iTNC53O control system.
Technical data:
Longitudinal clearance (X): 2 x 750 mm
Cross travel (Y): 500 mm
Vertical travel (Z): 600 mm
Table-spindle face distance: 180 - 780 mm
Machine table:
Table clamping surface: 1000 x 500 mm
"T" grooves 3 pieces (middle groove H7): 14 H9 mm
Table load. 800 kg/m2
(with uniform surface load of the table)
Feeds:
Max. sliding force: 9000N
Rapid traverse in X/Y/Z: 25/25/20 m/min
Feed in all axes: 1 – 9999 mm/min
Main drive-spindle:
Main drive AC motor with hollow shaft 40% ED: 40 kW
Speed ​​range - stepless: 30-6000 rpm.
Spindle torque 40% BD: 191 Nm
Tool clamping via Pin / disc springs
Tool clamping force: 12000 N
Spindle diameter on front bearing: 65 mm
Tool clamping / Pin: SK40DIN69871 A/69872A
Toolbox:
Number of places in the plate magazine: 22
Tool change time: approx. 7 s
time from cut to cut: approx. 9 s
Max. weight / tool length: 8 kg / 400 mm
Tool diameter / with free adjacent places: 85/180 mm.
Drilling performance in steel St 60: Drill with ® 32 mm cutting inserts at s = 0.13 mni/rev. to full material
Thread cutting in St 60 steel: M 18, above M 18 milled
Milling performance in St 60 steel: 400 cm3/min with a 63 mm ® face mill with suitable tool and cutting conditions (depending on selected drive)
Power supply: 3x400/230V N PE, 50Hz; 69 kVA
Machine data:
Width 2250 mm
Length 4460 mm
Height 3550 mm
Machine weight approx. 12,000 kg