Description
- Biomek FXp Liquid Handler
- Dual 96-Well P200 Head Pods
- 4x3 ALPs
- 4 One X One ALP Orbital Shaker
- 96-Well Tip Washer
- 2 Tip Loaders
- 2 Accu-Frame Device
- 2 Accu-Frame Alignment Probes
- Accu-Frame Plate Adapter Tool
- PC, Monitor, Keyboard, and Mouse, with Biomek Software Installed
- PC has a Digi 8-Port Serial Card
- Power Cable
- 120-Day Warranty
Manufactured in 2012
Fully Tested and Working Without Issue
After its initial disinfection and inspection, our technicians tested the Biomek FXp with the following results:
- Tested both pods by aligning the ALPS: PASSED
- Tested the shakers, grippers, and the tip loaders: PASSED
- Tested the tip washer: PASSED
Please note two important aspects about this system:
- The tip washer will require a pump and a controller.
- This system will require compressed air to operate.
- Tips and microplates need sourced separately.
Manufacturer
Beckman Coulter
Model
Biomek FXp
Mfg. Year
2012
Power Data
US: 100-120VAC, 60Hz
Europe: 200-240VAC, 50Hz
System Fluid Requirements
De-ionized or distilled water
Ambient operating temperature is 59-86ºF (15-30ºC)
System Fluid should be degassed for 24 hours prior to use.
Ambient Operating Temp
5-30ºC (41-86ºF)
Humidity Restrictions
<85% (non-condensing) @ 30ºC (86ºF)
Altitude Restrictions
Up to 2000m (6562ft)
Installation Category
Category II
Pollution Degree
2
Sound Pressure Level
Maximum sound pressure: 79dB
Maximum sound pressure at 1 meter: 76dB
Fuses
US: 250VAC, 5A, 5x20 mm, SLO-BLO, UL recongized, CSA approved
Europe: 250VAC, 5A, 5x20 mm, SLO-BLO, CENELEC approved
Dimensions (WxDxH)
139.7 x 81.28 x 152 cm with Canopy
(109.22 x 81.28 x 152 cm without Canopy)
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase