BONAPACE BP 10-11 Tube filler Top seller

Description

production Cycle
The BP 10-11 line, utilizes pre- formed suppository containers in reel.
The containers from the loading disc placed at the entrance of the filling machine are automatically unwind and fed under the dosing nozzle, filled with melted suppository mass which is kept at a constant temperature and mixed in the jacketed hopper.
Then, the filled containers are automatically rewound on the supporting disc placed at the outlet of the filling machine and at the same time are cooled off by the cooling unit.
Afterwards the disc with the filled containers is replaced by a new one and the filling cycle may restart. Meanwhile, the disc containing the reel previously filled may continue cooling until the contents solidify in the drawer of the cooling unit.
For the final stage, the cooled reel is placed on the sealing machine where the containers are automatically sealed, trimmed and cut in the pre set number.
Filling machine specifications
Dosing group with single nozzle: dosing range adjustable from 0 to 3,5 cc with micrometric increments of 0,10 cc.
25 liters jacketed hopper with water circulation for BP-10
Hopper temperature range from 30 to 85° C. Temperature tolerance inside the hopper +/- 0,5° C.
Double wing stirrer with adjustable speed inside the hopper
All parts in contact with the product are in stainless steel Aisi 316 L
Absorbed power: 450 watts for BP 10 - 2000 watts for BP 11
Machine sealing specifications
·Sealing performed by impulse heating
Sealing and cutting machine
Temperature stabilisation of sealing jaws assured by two high-flow fans ·
Sealing temperature adjustable by a 6 positions
commutator
Automatic trimming of top edge of containers after
sealing operation
Cutting in strips of a pre-set number
Absorbed power: 480 watts