Specifications

Board thickness 60 mm
Edge thickness 12 mm
Feed advance 20 m/min
Sound-proof cabin Yes
-------------------
Worked hours
Hours under power
State good
At local norms yes
Status visible

Description

Single sided edge bander with hot melt, fixed side at the right, pre-milling unit
Edge thickness: 0,4 to 12 mm
Workpiece thickness: 8 - 60 mm
Feedspeed 8-20 m/min (limited to 10 m/min using the contour trimming)
Workpiece transport by chain, top pressures with rubber rollers
Sound enclosure over all trimming motors
Equipment:
Adjustable fence
Pre-milling with 2 shapers, each 2,2 kW
Coil and strip magazine
Hot melt unit, Quickmelt type
Pressure zone with1 driven and 2 non-driven pneum. Loaded rollers
End trims, 2 x 0,35 kW motors, straight and chamfer 15°
Top/bottom trimming, motors 2 x 0,35 kW
Radius trimmming
Contour trimming unit, leading and following edge, 2 x 0,35 kW
Radius scraping unit
Glue scrapers
Buffing unit
Controlls PC 20+

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type Reseller
Active since 2019
Offers online 70
Last activity Nov. 21, 2024

Description

Single sided edge bander with hot melt, fixed side at the right, pre-milling unit
Edge thickness: 0,4 to 12 mm
Workpiece thickness: 8 - 60 mm
Feedspeed 8-20 m/min (limited to 10 m/min using the contour trimming)
Workpiece transport by chain, top pressures with rubber rollers
Sound enclosure over all trimming motors
Equipment:
Adjustable fence
Pre-milling with 2 shapers, each 2,2 kW
Coil and strip magazine
Hot melt unit, Quickmelt type
Pressure zone with1 driven and 2 non-driven pneum. Loaded rollers
End trims, 2 x 0,35 kW motors, straight and chamfer 15°
Top/bottom trimming, motors 2 x 0,35 kW
Radius trimmming
Contour trimming unit, leading and following edge, 2 x 0,35 kW
Radius scraping unit
Glue scrapers
Buffing unit
Controlls PC 20+

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Specifications

Board thickness 60 mm
Edge thickness 12 mm
Feed advance 20 m/min
Sound-proof cabin Yes
-------------------
Worked hours
Hours under power
State good
At local norms yes
Status visible

About this seller

Client type Reseller
Active since 2019
Offers online 70
Last activity Nov. 21, 2024

Here is a selection of similar machines

Brandt PROFILINE KDF 560 edgebander