Specifications

Cutting length 3060 mm
-------------------
Length x width x height 3900.0 × 3275.0 × 1900.0
Weight 6550 kg
Worked hours
Hours under power
State as-is, where-is
At local norms yes
Status

Description

Capacity (mm) 3060 mm
Cutting angle 1,5°
Max. cutting length : 3060 mm

Cutting performance for material Tensile strenght 400 N/mm² : 6 mm
Cutting performance for material Tensile strenght 600 N/mm² : 4 mm
Rear stop speed : 120 mm/s
Cutting angle : 1,5 °
Max. strokes for full cutting length : 20 1/min
Number of hold-down units : 17 pcs
Oil tank capacity : 180 liters
Table length : 3320 mm
Table depth : 485 mm
Table height : 800 mm
Machine body depth : 1535 mm
Length approx. : 3900 mm
Width/depth approx. (with back fence and front arms) : 3275 mm
Height approx. : 1900 mm
Weight approx. : 6550 kg
Drive motor output : 11 kW

Including:
Cybelec cybtouch 8 control unit
Control unit on swivel arm
CE-norm with light barrier on the back side
Stainless steel table tops
Sheet slider at rear
Motorised blade gap adjustment
Ballscrew backgauge 1000mm
1mt. flip-up finger guards with plexi glass
1 Squaring arm L = 1500mm, with scale & T-slot and tilting stop
2 Support arms L = 1000mm
Ball transfer tables
Stroke counter from control unit
Rubber pads for holddowns
LED illumination & shadow wire
Top 2 side & bottom blades with 4 side
Hydraulic valves : duplomatic
Hydraulic pump : kcl

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type Reseller
Active since 2009
Offers online 64
Last activity Nov. 22, 2024

Description

Capacity (mm) 3060 mm
Cutting angle 1,5°
Max. cutting length : 3060 mm

Cutting performance for material Tensile strenght 400 N/mm² : 6 mm
Cutting performance for material Tensile strenght 600 N/mm² : 4 mm
Rear stop speed : 120 mm/s
Cutting angle : 1,5 °
Max. strokes for full cutting length : 20 1/min
Number of hold-down units : 17 pcs
Oil tank capacity : 180 liters
Table length : 3320 mm
Table depth : 485 mm
Table height : 800 mm
Machine body depth : 1535 mm
Length approx. : 3900 mm
Width/depth approx. (with back fence and front arms) : 3275 mm
Height approx. : 1900 mm
Weight approx. : 6550 kg
Drive motor output : 11 kW

Including:
Cybelec cybtouch 8 control unit
Control unit on swivel arm
CE-norm with light barrier on the back side
Stainless steel table tops
Sheet slider at rear
Motorised blade gap adjustment
Ballscrew backgauge 1000mm
1mt. flip-up finger guards with plexi glass
1 Squaring arm L = 1500mm, with scale & T-slot and tilting stop
2 Support arms L = 1000mm
Ball transfer tables
Stroke counter from control unit
Rubber pads for holddowns
LED illumination & shadow wire
Top 2 side & bottom blades with 4 side
Hydraulic valves : duplomatic
Hydraulic pump : kcl

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Specifications

Cutting length 3060 mm
-------------------
Length x width x height 3900.0 × 3275.0 × 1900.0
Weight 6550 kg
Worked hours
Hours under power
State as-is, where-is
At local norms yes
Status

About this seller

Client type Reseller
Active since 2009
Offers online 64
Last activity Nov. 22, 2024

Here is a selection of similar machines

BURNET BTS3006 hydraulic shear