Description
CNC laser cutting Bysprint 3015 Bylaser 2200 used very little, only for prototyping.
Working range:
* X-axis - 3000mm
* Y-axis - 1500mm
* Z-axis lift - 70mm
Machining accuracy:
* VDI 3441 machining tolerance ± 0.1
* Finding tolerance ± 0.05
Edge detection accuracy:
* Detection tolerance ± 0.05
* Finding tolerance ± 0.2
Load bearing capacity:
* Interchangeable lifting table 890kg
* Fixed plate table 3500kg
Power supply to the machine:
* Three-phase, + PE 50/60Hz electrical connection.
* Machine: cos. 0.91 , 100AT , 4 poles 3x400/480V
* Air emission filter: cos. 0.8 , 25AT , 4 poles 3x400/480V
Cooling water:
* Water flow rate 95
* Water starting temperature 19°C
* Water temperature constant ± 1 K
* Impurities <50
* Maximum allowable conductivity value <6000
* Cooling water pressure 4-5 bar
Laser machine air:
* Minimum inlet pressure 6 bar
* Maximum machine consumption 20 Nm³/h
* Maximum particle density 5mg/m³
* Maximum residual oil content 0.1 mg/m³
* Condensation point under pressure 3°C
Air emission filter device: (Keller)
* Minimum inlet pressure 6.5 bar
* Maximum filter cleaning consumption 10 Nm³/h
Process gas
* Fitting outer diameter 12mm
* Primary pressure N2 dynamic 1100l/min 25 bar
* Primary pressure O2 dynamic 400l/min 18 bar
Dimensions and weights.
* Base frame with table 4.6 x 2.2 x 1.1 Weight 4800kg
* Trolley and deck 5.1 x 0.8 x 1.3 Weight 800kg
* Protective door 4.0 x 2.0 x 0.3 Weight 250kg
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase