Specifications

Edge thickness 3 mm
Feed advance 14 m/min
Glue tank Yes
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status

Description

CEHISA SYSTEM 7P SINGLE-SIDE EDGE BANDING MACHINE WITH GLUE BOILER

GENERAL CHARACTERISTICS:

Height max. machinable panel with straight edge: 55 mm
Applicable edges on coils: thin and PVC up to: 3 mm
Applicable edges in wooden strips: solid wood up to: 8 mm

PANEL MOVEMENT SYSTEM AND OPTIONS:

Feed chain
Top clamp with rows of free swivel wheels
Height-adjustable upper clamp
Continuously variable feed speed: 1-14 m / min
Panel support guide
Side bar with rows of free wheels supporting the panels

OPERATING GROUPS IN THE SQUARE PART:

Rectifier group to rectify the side of the panel. It is made up of 2 motors with automatic intervention on time to avoid chipping on the panel - motor power: 1.5 KW (1200 rpm)

GLUING GROUP, LOADER AND EDGE PRESSER:

Coil support
Glue tank for hot melt glue
Spreading roller for adjusting the amount of glue applied
Shear for cutting edge into rolls
Edge pressure roller group for straight edges

OPERATORS GROUP OF THE BORDERING PART:

Trimming unit with: 2 motors for cutting the excess edge on the front and back of the panel
tilting motors: 0/100 degrees
automatic tilt adjustment - motor power: 0.35 KW (rpm)
Profiling-chamfering group for profiling and chamfering the excess edge at the top and bottom of the panel
tilting motors: 0/20 degrees
motor power: 0.55 kw (1200 rpm)
Profiling-chamfering group to profile and chamfer the excess edge at the top and bottom of the panel
tilting motors: 0/20 degrees
motor power: 0.55 kw (1200 rpm)
Rounding unit: 2 motors for automatic rounding of the edge angles in the upper and lower part of the panel
motor power: 0.35 kw (12000 rpm)
Open space to add eventual supplementary operating groups
Edge scraper unit for edge finishing
Glue scraper group to remove glue residue at the junction point between the edge and the panel
Group of brushes with motors to clean and shine the upper and lower edge - OSCILLATING SYSTEM.

REGULATIONS AND SAFETY OPTIONS

CE regulation
Soundproofed protection booth for operating groups
Suction system in the upper part of the protection cabin
Total installed power: 14 KW

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type Reseller
Active since 2020
Offers online 24
Last activity Nov. 13, 2024

Description

CEHISA SYSTEM 7P SINGLE-SIDE EDGE BANDING MACHINE WITH GLUE BOILER

GENERAL CHARACTERISTICS:

Height max. machinable panel with straight edge: 55 mm
Applicable edges on coils: thin and PVC up to: 3 mm
Applicable edges in wooden strips: solid wood up to: 8 mm

PANEL MOVEMENT SYSTEM AND OPTIONS:

Feed chain
Top clamp with rows of free swivel wheels
Height-adjustable upper clamp
Continuously variable feed speed: 1-14 m / min
Panel support guide
Side bar with rows of free wheels supporting the panels

OPERATING GROUPS IN THE SQUARE PART:

Rectifier group to rectify the side of the panel. It is made up of 2 motors with automatic intervention on time to avoid chipping on the panel - motor power: 1.5 KW (1200 rpm)

GLUING GROUP, LOADER AND EDGE PRESSER:

Coil support
Glue tank for hot melt glue
Spreading roller for adjusting the amount of glue applied
Shear for cutting edge into rolls
Edge pressure roller group for straight edges

OPERATORS GROUP OF THE BORDERING PART:

Trimming unit with: 2 motors for cutting the excess edge on the front and back of the panel
tilting motors: 0/100 degrees
automatic tilt adjustment - motor power: 0.35 KW (rpm)
Profiling-chamfering group for profiling and chamfering the excess edge at the top and bottom of the panel
tilting motors: 0/20 degrees
motor power: 0.55 kw (1200 rpm)
Profiling-chamfering group to profile and chamfer the excess edge at the top and bottom of the panel
tilting motors: 0/20 degrees
motor power: 0.55 kw (1200 rpm)
Rounding unit: 2 motors for automatic rounding of the edge angles in the upper and lower part of the panel
motor power: 0.35 kw (12000 rpm)
Open space to add eventual supplementary operating groups
Edge scraper unit for edge finishing
Glue scraper group to remove glue residue at the junction point between the edge and the panel
Group of brushes with motors to clean and shine the upper and lower edge - OSCILLATING SYSTEM.

REGULATIONS AND SAFETY OPTIONS

CE regulation
Soundproofed protection booth for operating groups
Suction system in the upper part of the protection cabin
Total installed power: 14 KW

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Specifications

Edge thickness 3 mm
Feed advance 14 m/min
Glue tank Yes
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2020
Offers online 24
Last activity Nov. 13, 2024

Here is a selection of similar machines

Cehisa System 7 P Single sided edgebander