CHIRON DZ 15 W Machining center - vertical

Description

Constructor / Manufacturer: CHIRON
Machine designation / Machine designation: DZ 15 W High Speed
Year of construction / Year of construction: 2004
Axes on the pallet side 1 / Axis on first side of turntable 4 axes: X, Y, Z, A (limitation 0 to 180° on axis A)
Axes on pallet side 2 / Axis on second side of turntable 4 axes: X, Y, Z, A (limitation 0 to 180° on axis A)
Sizes / Sizes
Center distance between spindles / Distance of axes: 250 mm
Max tool diameter / Max. tool diameter: 65 mm / 175 mm (without adjacent tool)
Max tool length / Max tool lenght: 220 mm
Axis travels (X x Y x Z) / Axis travel: 300 x 400 x 425 mm
Axis travels (A, B) / Axis rotation: 0 to 180 / – degrees
External dimensions (Width x Length x Height) / External dimensions (Width x Length x Height): 2,660 x 4,375 x 2,850 mm
Machine weight / Machine weight: 8.7t
Installed electrical power / Installed electrical power: 28 kVA

Speeds, Accelerations, Times / Speeds, accelerations, times
Spindle max speed / Spindle max speed: 10500 rpm
Spindle acceleration time / Spindle acceleration time: 1.2 s
Positioning time / Positioning time: 0.08 s
Fast travel speed (X, Y, Z) / Fast travel speed: 40 / 40 / 40 m/min
Axis acceleration (X, Y, Z) / Axis acceleration: 5 / 5 / 5 m/s²
Maximum axis thrust (X, Y, Z) / Max axis thrust: 5000 / 5000 / 10000 N
Axis rotation speed (A,B) / Axis speed: 100 / – rpm
Angular acceleration of the axes (A, B) / Axis acceleration: 38 / – rad/s²
Chip to chip tool change time / Chip to chip tool change time: 5 s
Pallet rotation time / Turntable change time: 9.5 s
Spindle properties / Spindle properties
Number of spindles / Number of Spindels: 2
Type of spindle attachment / Spindle attachment: SA 40 (DIN69871)
Max tool weight (at normal speed) / Max tool weight (fast speed): 2.5 kg / 5 kg (without adjacent tool, 4 x 5 kg maximum)
Spindle power / Spindle power: 28 Kw
Palletization / Turntable: 2 pallets
Maximum permissible load on the pallet / Max weight on the table: 2 x 150 kg
Hydraulic pressure available / Available hydraulic pressure: 200 bar
pneumatic pressure min. required/ Min. pneumatic pressure need: 6 bar
Charger / Tool charger: Trash
Number of tools in the magazine / Number of tools in the magazine: 2 x 12
Max pressure of the cutting fluid / Max pressure of the cutting fluid: 40 bar
Spindle center coolant / Sprinkling from the spindle center: yes
Chip evacuation / chip evacuation: yes