Complete Plant for Thermal Destruction of PFU and Hospital Waste with Electricity Generation Generator set Verified seller

Price on request

Make an offer
Manufacturer Complete Plant
Model for Thermal Destruction of PFU and Hospital Waste with Electricity Generation
Year 2000
Location Italy IT
Category Electricity - Generator sets
Product id P240702379
Language

Specifications

Alternator manufacturer
Alternator model
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status

Description

Innovative Incinerator Plant for P.F.U. Thermodestruction and Electricity Generation (2,000 Kg./h.)

TO PRODUCE KWH 21,000,000 / YEAR

MARANGONI THERMOVALORIZING PLANT BURNS 15,000 TONS ANNUALLY (X Tires ) BUT IT ALSO PROCESSES OTHER WASTES.

- Car fluff (automobile scrapping residue) - 20 - 22,000 tons /year - CER codes 191003 - 191004
- Hospital waste (usually in boxes) - about 20,000 tons/year - EWC codes 1801 and similar
- Secondary solid fuel: no longer a waste, comes from treatment of municipal waste -

also in quantities in the range of 20 - 22,000 tons/year.

- Paper mill pulper - EWC 030307
- Dried sewage sludge.

NB

These wastes (along with tires) may be mixed with any other wastes,

in percentages up to 10 - 15% can be used together with a main waste.

The important characteristic is that they should not be waste with too fine a grain size.

The plant consists of the following components:

- ELT conveying system (Car and Giant)
- PFU thermodestructor
- Afterburner with methane burner
- Wire/ash exhaust and separation system
- Hot flue gas by-pass chimney
- Heat recovery boiler or HRSG (Heat Recovery Steam Generator)
- Master fan, cold flue gas by-pass and flue gas duct to filters
- Bag filters for dedusting and desulfurization
- Final stack tail fan
- Turbogenerator
- Thermal cycle components
- Electrical power system (transformers, ele switchboards, cables)
- Generator set
- Control and supervision system
- Water demineralization plant
- Continuous chimney emission monitoring system

Operating data

Tire feeding system

PFUV

- Nominal capacity 2000 kg/h
- Max diameter 800 mm
- Max height 350 mm
- Weight 6÷7 kg
- Accumulation type Bulk
- Average weight/volume 100 kg/m³

PFUG

- Nominal flow rate 2000 kg/h
- Weight 60÷70 kg
- Max diameter 1400 mm
- Max height 460 mm
- Accumulation type Bulk

The plant is planned for 100% PFUV default operation.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type Reseller
Active since 2024
Offers online 191
Last activity Dec. 22, 2024

Description

Innovative Incinerator Plant for P.F.U. Thermodestruction and Electricity Generation (2,000 Kg./h.)

TO PRODUCE KWH 21,000,000 / YEAR

MARANGONI THERMOVALORIZING PLANT BURNS 15,000 TONS ANNUALLY (X Tires ) BUT IT ALSO PROCESSES OTHER WASTES.

- Car fluff (automobile scrapping residue) - 20 - 22,000 tons /year - CER codes 191003 - 191004
- Hospital waste (usually in boxes) - about 20,000 tons/year - EWC codes 1801 and similar
- Secondary solid fuel: no longer a waste, comes from treatment of municipal waste -

also in quantities in the range of 20 - 22,000 tons/year.

- Paper mill pulper - EWC 030307
- Dried sewage sludge.

NB

These wastes (along with tires) may be mixed with any other wastes,

in percentages up to 10 - 15% can be used together with a main waste.

The important characteristic is that they should not be waste with too fine a grain size.

The plant consists of the following components:

- ELT conveying system (Car and Giant)
- PFU thermodestructor
- Afterburner with methane burner
- Wire/ash exhaust and separation system
- Hot flue gas by-pass chimney
- Heat recovery boiler or HRSG (Heat Recovery Steam Generator)
- Master fan, cold flue gas by-pass and flue gas duct to filters
- Bag filters for dedusting and desulfurization
- Final stack tail fan
- Turbogenerator
- Thermal cycle components
- Electrical power system (transformers, ele switchboards, cables)
- Generator set
- Control and supervision system
- Water demineralization plant
- Continuous chimney emission monitoring system

Operating data

Tire feeding system

PFUV

- Nominal capacity 2000 kg/h
- Max diameter 800 mm
- Max height 350 mm
- Weight 6÷7 kg
- Accumulation type Bulk
- Average weight/volume 100 kg/m³

PFUG

- Nominal flow rate 2000 kg/h
- Weight 60÷70 kg
- Max diameter 1400 mm
- Max height 460 mm
- Accumulation type Bulk

The plant is planned for 100% PFUV default operation.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Specifications

Alternator manufacturer
Alternator model
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2024
Offers online 191
Last activity Dec. 22, 2024

Here is a selection of similar machines

Complete Plant for Thermal Destruction of PFU and Hospital Waste with Electricity Generation Generator set