Description
We have 4 used Comtech CDM-760 high speed satellite modems, L-band, tested with a 1-year replacement warranty Guaranteed.
Comtech EF Data CDM-760 Satellite Ultra Advanced High-Speed Trunking Modem, Used, Fully Tested, 1-Year Warranty
The CDM-760 offers an expansive range of symbol rates (100 ksps to 150 Msps) and data rates (100 kbps to >720 Mbps) simplex. In a duplex setting, this is >1.4 Gbps or 300 Msps. The onboard Ethernet interfaces support Super Jumbo Frames from 64 Bytes to >10,000 Bytes and will process Ethernet frames at a blazing > 1.2 Million packets / second. With the optional Packet Processor card installed the CDM-760 can support > 350,000 packets per second while performing simultaneous Header Compression and QoS.
Comtech offers a variety of open or closed network specifications and MODCOD selections. The CDM-760 can be configured to run as DVB-S2 (EN 302 307), DVB-S2X (EN 302 307-2) open standard waveforms, or with Comtech’s DVB-S2-EB1& EB2 (Efficiency Boost) waveforms. All waveforms are interoperable with ACM and the CDM-760 DPD (Dynamic Pre-Distortion). DPD allows satellite amplifiers to push further into saturation, maximizing transponder efficiency. The pre-distortion function is constantly optimized by the modem and does not require any user intervention.
Implementing Adaptive Coding and Modulation (ACM) operation allows link margin to be converted to user capacity during non-faded conditions by taking advantage of the actual signal-to-noise ratio rather than calculated worst-case signal to noise.
By using the best encapsulation methods, the CDM-760 further increases throughput by using minimal overhead. In G.703 synchronous mode, users can implement monitor and control over the satellite with no additional overhead. When using Ethernet bridge mode, less than 1% overhead is used for encapsulation.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase