Specifications

Turning Ø 380 mm
Ø above the bed 700 mm
Ø above transversing slide 480 mm
Length between centers 2100 mm
Type of CNC FANUC 18 iT
X-axis 362 mm
Z-axis 2155 mm
Spindle taper A2 - 11
Spindle bore 132 mm
Number of tools on turret 10
Turning speed 2000 rpm
Tailstock no
Bar feeder no
-------------------
Worked hours
Hours under power
State as-is, where-is
At local norms ---------
Status

Description

CONTROL FANUC 18 iT
CHUCK SIZE 450.0 mm
SWING OVER THE BED 700.0 mm
SWING OVER SADDLE 480.0 mm
MAX TURNING DIA. 380.0 mm
BETWEEN CENTRES 2100.0 mm
DRAW TUBE DIA. 117.5 mm
TRAVELS: X AXIS: 362.0 mm Z AXIS: 2155.0 mm
TURRET 10 STATIONS
SPINDLE SPEED 20 - 2,000 rpm
SPINDLE BORE 132.00 mm
SPINDLE NOSE A2 - 11
BEARING DIA. 180.0 mm
TURRET TOOL HEIGHT 25.0 mm
TURRET BAR DIA. 50.0 mm
TURRET INDEXING TIME 0.25 sec
FEEDRATE RAPID TRAVERSE X: 16,000 mm/min Z: 18,000 mm/min
FEEDRATE CUTTING FEED X , Z: 0,001 ~ 500.000
TAILSTOCK QUILL DIA. 120.0 mm
TAILSTOCK QUILL BORE TAPER MT#6
TAILSTOCK QUILL TRAVEL 120.0 mm
PLUS HYDRAULIC STEADY TOOL SETTING ARM SWARF CONVEYOR

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type Reseller
Active since 2015
Offers online 50
Last activity Dec. 24, 2024

Description

CONTROL FANUC 18 iT
CHUCK SIZE 450.0 mm
SWING OVER THE BED 700.0 mm
SWING OVER SADDLE 480.0 mm
MAX TURNING DIA. 380.0 mm
BETWEEN CENTRES 2100.0 mm
DRAW TUBE DIA. 117.5 mm
TRAVELS: X AXIS: 362.0 mm Z AXIS: 2155.0 mm
TURRET 10 STATIONS
SPINDLE SPEED 20 - 2,000 rpm
SPINDLE BORE 132.00 mm
SPINDLE NOSE A2 - 11
BEARING DIA. 180.0 mm
TURRET TOOL HEIGHT 25.0 mm
TURRET BAR DIA. 50.0 mm
TURRET INDEXING TIME 0.25 sec
FEEDRATE RAPID TRAVERSE X: 16,000 mm/min Z: 18,000 mm/min
FEEDRATE CUTTING FEED X , Z: 0,001 ~ 500.000
TAILSTOCK QUILL DIA. 120.0 mm
TAILSTOCK QUILL BORE TAPER MT#6
TAILSTOCK QUILL TRAVEL 120.0 mm
PLUS HYDRAULIC STEADY TOOL SETTING ARM SWARF CONVEYOR

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Specifications

Turning Ø 380 mm
Ø above the bed 700 mm
Ø above transversing slide 480 mm
Length between centers 2100 mm
Type of CNC FANUC 18 iT
X-axis 362 mm
Z-axis 2155 mm
Spindle taper A2 - 11
Spindle bore 132 mm
Number of tools on turret 10
Turning speed 2000 rpm
Tailstock no
Bar feeder no
-------------------
Worked hours
Hours under power
State as-is, where-is
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2015
Offers online 50
Last activity Dec. 24, 2024

Here is a selection of similar machines

DAEWOO - DOOSAN PUMA 400 LB cnc lathe