Description

AUTOMATIC CUTTING LINE

Motorized roller conveyor system, front and rear, with metal rollers with built-in bearings. Diameter of rolls 133 mm, centers of 500 mm. Input length 4 m, and output 4 m.
Cutting station equipped with motorized roller conveyors, metal rollers with built-in bearings. Roll diameter 89 mm, center distance 250 mm
Total length of the motorized rollers: 9 m 20
Motorization by 3-hp gearbox motor and transmission chain
Electronic speed controller for controlling the movement of wood
Rigid vertical support rollers fixed on the back of the entry table and on both sides of the cutting blade, 108 mm diameter rolls, with internal bearings.


Cutting unit with guide and chain, with maximum passage of packages 1200 mm wide and 1200 mm high.
2-fold reversible guide and STIHL 404 chain (Accurate and very economical)
Main chain motor of 15 HP at 2800 rpm.Chain cutting with special drive sprockets.
Automatic chain tensioning device.
Horizontal cutting carriage mounted on round columns, with sliders with ball circulation.
Electric movement of up and down with 2 HP engine and transmission by double chains.
The rise and fall is adjustable by electronic dimmer for precise adjustment of the cutting speed. Automatic slowing of the cut in case of overload.
2 upper pneumatic pressers to hold the pack during cutting.
Postage cutting alignment laser beam


Total KW
20

CABLE SECTION
10 mm2

VOLTAGE
380V three-phase 50HZ

AMPERAGE
3X63 amperes

MINIMUM CUTTING LENGTH
600 mm

MAXIMUM CUTTING LENGTH
2500 (automatic)
5400 (manual)

VACUUM
Diam. 160mm