Specifications

Axis X 500 mm
Axis Y 450 mm
Axis Z 400 mm
CNC ITNC 530 Heidenhain
Type of axis Tilting bed
Table length 630 mm
Table width 500 mm
Max. part weight 300 kg
Number of tool pockets 60
Spindle taper SK 40
Spindle motor power 20.3 kW
-------------------
Length x width x height 5.0 × 4.0 × 2.8
Weight 5.6 kg
Worked hours
Hours under power
State good
At local norms ---------
Status visible

Description

achine Category Machining Center - Universal
Make DMG MORI
Type DMU 50
Year 2016
Control iTNC 530 Heidenhain
Other information 5 Axis - CNC - Machiningcenter Universal
DMG MORI - DMU 50

- 5-Axis-Simultaneous-Machining
- NC-Swivel-Rotary-table
- internal coolant supply
- WITHOUT tools / WITHOUT vices
- Spindle-hrs.: ca. 5.900h

Technical Details
x-travel 500 mm
y-travel 450 mm
z-travel 400 mm
Control iTNC 530 Heidenhain
Main spindle:
turning speed range - main spindle 20 - 14.000 min/-1
power capacity - main spindel 20,3 / 14,5 kW
max. Torque 130 Nm
tool taper SK 40
NC-Tilting round table:
table surface area Ø 630 x 500 mm
max. table load 300 kg
swivellable B: -5° / +110 °
rotatable C: 360 °
number of T-slots 7
tool magazin:
number of toolpositions 60 pos.
Tool actuation Turret: SK 40
max. tool diameter 80 / 130 mm
max. tool length 300 mm
max. tool weight 6,0 kg
feeds:
rapid traverse ( X / Y / Z ) 30 m/min
feed power max. 4,8 kN
total power requirement 21 kW
weight of the machine ca. 5,6 t
dimensions of the machine ca. 5,0 x 4,0 x 2,8 m

Equipment
Documents
Chip conveyor
Coolantsystem
high pressure coolant 20 bar / 600l
through spindle coolant
test probe Heidenhain TS 649
3D quickSET
NC-Rotary Swiveling Table
Tool Magazine
direct travel-measuring-system X Y Z B C
Spray gun
Rotary screen
Rotary Union
elektr. hand wheel
Operation mode 4
oil mist extraction
Signal-Light
paper band filter

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type Reseller
Active since 2024
Offers online 1
Last activity Dec. 16, 2024

Description

achine Category Machining Center - Universal
Make DMG MORI
Type DMU 50
Year 2016
Control iTNC 530 Heidenhain
Other information 5 Axis - CNC - Machiningcenter Universal
DMG MORI - DMU 50

- 5-Axis-Simultaneous-Machining
- NC-Swivel-Rotary-table
- internal coolant supply
- WITHOUT tools / WITHOUT vices
- Spindle-hrs.: ca. 5.900h

Technical Details
x-travel 500 mm
y-travel 450 mm
z-travel 400 mm
Control iTNC 530 Heidenhain
Main spindle:
turning speed range - main spindle 20 - 14.000 min/-1
power capacity - main spindel 20,3 / 14,5 kW
max. Torque 130 Nm
tool taper SK 40
NC-Tilting round table:
table surface area Ø 630 x 500 mm
max. table load 300 kg
swivellable B: -5° / +110 °
rotatable C: 360 °
number of T-slots 7
tool magazin:
number of toolpositions 60 pos.
Tool actuation Turret: SK 40
max. tool diameter 80 / 130 mm
max. tool length 300 mm
max. tool weight 6,0 kg
feeds:
rapid traverse ( X / Y / Z ) 30 m/min
feed power max. 4,8 kN
total power requirement 21 kW
weight of the machine ca. 5,6 t
dimensions of the machine ca. 5,0 x 4,0 x 2,8 m

Equipment
Documents
Chip conveyor
Coolantsystem
high pressure coolant 20 bar / 600l
through spindle coolant
test probe Heidenhain TS 649
3D quickSET
NC-Rotary Swiveling Table
Tool Magazine
direct travel-measuring-system X Y Z B C
Spray gun
Rotary screen
Rotary Union
elektr. hand wheel
Operation mode 4
oil mist extraction
Signal-Light
paper band filter

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Specifications

Axis X 500 mm
Axis Y 450 mm
Axis Z 400 mm
CNC ITNC 530 Heidenhain
Type of axis Tilting bed
Table length 630 mm
Table width 500 mm
Max. part weight 300 kg
Number of tool pockets 60
Spindle taper SK 40
Spindle motor power 20.3 kW
-------------------
Length x width x height 5.0 × 4.0 × 2.8
Weight 5.6 kg
Worked hours
Hours under power
State good
At local norms ---------
Status visible

About this seller

Client type Reseller
Active since 2024
Offers online 1
Last activity Dec. 16, 2024

Here is a selection of similar machines

DMG Mori DMU 50 Machining center - 5 axis