DMG MORI WASINO G 100 | 300 cnc lathe Top seller

Description

This lathe was manufactured in 2017. The DMG MORI WASINO G 100 | 300 features a maximum turning diameter of 285 mm and a standard diameter of 60 mm. It supports bar work up to 38.1 mm and offers rapid traverse rates of 12000 mm/min on the X-axis and 20000 mm/min on the Z-axis. With a spindle speed up to 6000 min⁻¹, this machine is ideal for efficient operations. For more information about this lathe, please reach out to us.

Machine width: 1648 mm
Machine depth: 1958 mm
Machine height: 2430 mm
Machine weight: 1650 kg
Spindle speed range: 6000 rpm
Spindle motor power: 5.5 kW
X-Axis Movement: 300 mm
Z-Axis Movement: 285 mm
Air pressure: 0.5 MPa

High rapid traverse rates
High spindle speed (above 6000 min⁻¹)
Machine still under power

Units available: 4
Max. Turning Diameter: 285 mm (11.22 in)
Standard Turning Diameter: 60 mm (2.36 in)
Bar Work Capacity: 38.1 mm (1.5 in)
Spindle Nose Type: 100 mm (3.93 in) flat
Through Spindle Hole Diameter: 45 mm (1.77 in)
Spindle Bearing Inner Diameter: 75 mm (2.95 in)
Shank Height for Square Tool: 16 mm (0.63 in)
Shank Diameter for Boring Bar: 20 mm (0.79 in)
Rapid Traverse Rate:X-axis: 12000 mm/min (472.44 ipm)
Z-axis: 20000 mm/min (787.40 ipm)
Jog Feedrate: 0 - 5000 mm/min (196.85 ipm)
Motors:Spindle Drive Motor (40%/Continuous): 5.5/3.7 kW (7.33/4.93 HP)
Feed Motors: X-axis: 0.75 kW (1 HP), Z-axis: 1.2 kW (1.6 HP)
Hydraulic Pump Motor: 0.75 kW (1 HP)
Lubricating Pump Motor: 0.04 kW (0.053 HP)
Coolant Pump Motor: 0.18 kW (0.24 HP)
Cooling Oil Pump Motor: 0.06 kW (0.08 HP)
Compressed Air Supply: 0.5 MPa (72.5 psi), 80 L/min
Tank Capacities:Hydraulic Oil Tank Capacity: 10 L (2.65 gal)
Lubricating Oil Tank Capacity: 2 L (0.52 gal)
Coolant Tank Capacity: 147 L (38.88 gal)
Oil Heat Exchanger Tank Capacity: 10 L (2.65 gal)
Machine Mass with loader specification: 2165 kg