DOOSAN DNM 4500 Machining center - vertical (4 axis) Hot deal Low working hours

Description

CNC machining centre DOOSAN DNM4500 with Fanuc i-series control system

Year of manufacture: 2021/04
Power-on time: 3441 hrs.
1484 hrs.
Machining time: 1032 hrs.

Main data of the offered DNM4500 machine:
X-axis travel: 800 mm
Y-axis travel: 450 mm
Travel Z axis: 510 mm
Spindle to table distance: 150-660 mm
Table dimensions d x w: 1000 x 450 mm
Max. table load: 600 kg
Clamping T-slots: 3x 18H8 - spacing 125 mm

rotary table - 4th axis: ø250 mm = ***extra equipment included***
axis height: 160 mm = ***extra equipment included***
counter bearing to 4th axis

Spindle taper: ISO 40
Max. spindle speed: 12 000 rpm
Motor power (continuous/15min.): 11/18.5 kW
Direct spindle drive without V-belt
Preparation for "double contact" system
Tool clamping cone: DIN 69871 - A40

Tool magazine: 60 places = ***extra equipment included***
Max. tool diameter: 80 mm - fully loaded
125 mm - every second empty
Max. tool length: 300 mm
Max. tool weight: 8 kg

Tool laser probe: Renishaw NC4 = ***extra equipment included***
Workpiece probe: Renishaw OMP-60 = ***extra equipment included***

High pressure cooling: 30-70 bar = extra equipment included
Chip conveyor with built-in tank optional extra = ***extra equipment included***
Mist extraction from the working area - Losma = ***extra equipment included***
Oil separator OIL SKIMMER = ***extra equipment included***
3-colour light signal = ***extra equipment included***
Clamping cones, towing pins,
special clamping elements, etc. = ***extra equipment included***

Machine dimensions L/W/H: 2158/2615/2985 mm
Machine weight: 5 000 kg