Categories
Start selling

Account

Log In
Create an account

Account

Log In
Create an account
Dunkes HDS 125 P230720144
Dunkes HDS 125 P230720144
Dunkes HDS 125 P230720144
Dunkes HDS 125 P230720144
Dunkes HDS 125 P230720144
Dunkes HDS 125 P230720144
Dunkes HDS 125 P230720144
Dunkes HDS 125 P230720144

Dunkes HDS 125 Hydraulic press Top seller

Price on request

Make an offer
Manufacturer Dunkes
Model HDS 125
Year 1987
Location Germany DE
Category Hydraulic presses
Product id P230720144
Language
bg Dunkes HDS 125
cs Hydraulický lis Dunkes HDS 125
da Dunkes HDS 125
de Dunkes HDS 125 Hydraulikpresse
el Dunkes HDS 125
en Dunkes HDS 125 Hydraulic press
es Prensa hidráulica Dunkes HDS 125
fr Presse hydraulique Dunkes HDS 125
hr Dunkes HDS 125
hu Dunkes HDS 125
it Pressa idraulica Dunkes HDS 125
lt Dunkes HDS 125
nl Dunkes HDS 125
pl Prasa hydrauliczna Dunkes HDS 125
pt Dunkes HDS 125
ro Dunkes HDS 125
ru Dunkes HDS 125 Гидравлический пресс
sr Dunkes HDS 125
sv Dunkes HDS 125
tr Hidrolik Pres Dunkes HDS 125

Specifications

Power in tons 125 T
Type H-Frame
Table length 1000 mm
Table width 700 mm
Ram stroke 250 mm
Distance between columns 1050 mm
Engine Power 30 kW
-------------------
Length x width x height 1400.0 × 2000.0 × 3500.0
Weight 8500 kg
Worked hours
Hours under power
State good
At local norms ---------
Status

Description

Dunkes
hydraulic double-column (high-speed) drawing press
Type HDS 125 built in 1987
Pressure capacity of the upper piston 125 tons
Retraction force of the upper piston 15 to
Hydraulic ejector in the ram force/stroke 1 to/125 mm
Table size 1,000 x 700 mm
Ram area approx. 1,000 x 700 mm
Installation height max. 450 mm
Passage between the uprights at the front 1,050 mm
Upper piston stroke 250 mm
Lifting speed up/down 400 mm/sec
Stroke speed full pressure 18 -55 mm/sec
Drawing cushion in the table force/stroke 25 to/125 mm
Die cushion speed 85-144 or back 240 mm/sec.
Pump drive 30 kW
Total drive approx. 40 kW - 380 V - 50 Hz
Weight approx. 8,500 kg

Accessories / special equipment
– CNC control type CNC 1000 for controlling the press with direct input of all press and process data, also for corresponding tool data
Controlled die cushion installed in the lower table - ejector in the ram (40 mm)
· 4-fold V-guide of the upper piston for precision pressing
· SICK light barrier curtain with a protective height of 400 mm with 2-hand safety release and automatic run-on control device, automatic operation can be controlled via light barrier
· Selector switch for the following sequences: SETUP / two-hand / foot release / single-cycle / two-cycle / protective device or die cushion mode / ejector
· Contact manometer for displaying the pressure of the upper ram and die cushion
Cutting impact damping selectable via selector switch,
· Tool insertion device on the back with hydraulic tool clamping on the lower table, hydraulic pin clamping in the upper table, separate control cabinet and oil cooler attached to the hydraulic system.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type Reseller
Active since 2019
Offers online 158
Last activity Nov. 25, 2024

Description

Dunkes
hydraulic double-column (high-speed) drawing press
Type HDS 125 built in 1987
Pressure capacity of the upper piston 125 tons
Retraction force of the upper piston 15 to
Hydraulic ejector in the ram force/stroke 1 to/125 mm
Table size 1,000 x 700 mm
Ram area approx. 1,000 x 700 mm
Installation height max. 450 mm
Passage between the uprights at the front 1,050 mm
Upper piston stroke 250 mm
Lifting speed up/down 400 mm/sec
Stroke speed full pressure 18 -55 mm/sec
Drawing cushion in the table force/stroke 25 to/125 mm
Die cushion speed 85-144 or back 240 mm/sec.
Pump drive 30 kW
Total drive approx. 40 kW - 380 V - 50 Hz
Weight approx. 8,500 kg

Accessories / special equipment
– CNC control type CNC 1000 for controlling the press with direct input of all press and process data, also for corresponding tool data
Controlled die cushion installed in the lower table - ejector in the ram (40 mm)
· 4-fold V-guide of the upper piston for precision pressing
· SICK light barrier curtain with a protective height of 400 mm with 2-hand safety release and automatic run-on control device, automatic operation can be controlled via light barrier
· Selector switch for the following sequences: SETUP / two-hand / foot release / single-cycle / two-cycle / protective device or die cushion mode / ejector
· Contact manometer for displaying the pressure of the upper ram and die cushion
Cutting impact damping selectable via selector switch,
· Tool insertion device on the back with hydraulic tool clamping on the lower table, hydraulic pin clamping in the upper table, separate control cabinet and oil cooler attached to the hydraulic system.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase

Specifications

Power in tons 125 T
Type H-Frame
Table length 1000 mm
Table width 700 mm
Ram stroke 250 mm
Distance between columns 1050 mm
Engine Power 30 kW
-------------------
Length x width x height 1400.0 × 2000.0 × 3500.0
Weight 8500 kg
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2019
Offers online 158
Last activity Nov. 25, 2024

Here is a selection of similar machines

See all alternatives

Loading similar machines...

Categories

Menu Categories search

Menu

Start selling

Dunkes HDS 125 Hydraulic press