Specifications

Clamping force 650 T
Screw diameter 60 mm
Tie bar spacing (H) 1100 mm
Tie bar spacing (V) 960 mm
Shot volume 890 cm³
Pressure on material 2400 bar
Platen length 1510 mm
Platen width 1440 mm
Opening of the press 1400 mm
Mould size 350/850
-------------------
Weight 6500 kg
Worked hours
Hours under power
State as-is, where-is
At local norms ---------
Status

Description

This Engel duo 2400/650 electrical injection moulding machine was manufactured in 2019. It features a screw diameter of 60/70/80 mm, a screw stroke of 315 mm, and a maximum injection capacity of 890 cm³. The clamping force reaches up to 6500 kN with a maximum mold weight of 11000 kg. Consider the opportunity to buy this Engel duo 2400/650 electrical injection moulding machine. Contact us for more information about this machine.

Machine weight: 6500 kg
Brand: ENGEL
Spindle motor power: 92 kW
Screw diameter: 60/70/80 mm
Stroke volume: 315 mm
Injection pressure: 2400 bar
Screw speed: 220 min-1
Nozzle pressure: 2400 bar
Clamping force: 6500 kN
Opening stroke: 1400 mm
Distance between bars: 1100x960 mm
Mould height min: 350 mm
Mould height max: 850 mm
Size of mold platens: 1510x1440 mm
Ejector stroke: 250 mm
Ejector force for / back: 95 kN
Oil Reservoir Capacity - Injection Unit: 500 l
Maximum Cooling Power (32°C Water Inlet): 29.40 kWcool
Water Consumption (32°C): 4.80 m3/h

Maximum injection capacity: 890 cm³
Screw torque: 2000 nm // maximum screw speed @ reduced torque: 275 min-1
Reduced torque @ maximum screw speed: 1600 nm
Recovery rate (3-zone screw): 51 g/s // recovery rate (barrier screw): 67. 1 g/s
Injection rate: 353 cm³/s
Nozzle stroke: 950 mm
Ld ratio: 24. 0
Heating zones incl. Nozzle: 8 // heating wattage: 27. 5 kwel
Opening force with pressure pad: 510 kn
Maximum distance between platens: 1750 mmDrop Out Chute Width: 1100 mm
Weight of the Clamping Unit: 20000 kg
Maximum Mold Weight Moving Platen: 7330 kg
Maximum Mold Weight Stationary Platen: 7330 kg
Maximum Mold Weight Total: 11000 kg
Dry Cycle (Euromap 6) Stroke: 700 mm
Dry Cycle (Euromap 6) Time: 2.9 s

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type Reseller
Active since 2019
Offers online 1005
Last activity Jan. 4, 2025

Description

This Engel duo 2400/650 electrical injection moulding machine was manufactured in 2019. It features a screw diameter of 60/70/80 mm, a screw stroke of 315 mm, and a maximum injection capacity of 890 cm³. The clamping force reaches up to 6500 kN with a maximum mold weight of 11000 kg. Consider the opportunity to buy this Engel duo 2400/650 electrical injection moulding machine. Contact us for more information about this machine.

Machine weight: 6500 kg
Brand: ENGEL
Spindle motor power: 92 kW
Screw diameter: 60/70/80 mm
Stroke volume: 315 mm
Injection pressure: 2400 bar
Screw speed: 220 min-1
Nozzle pressure: 2400 bar
Clamping force: 6500 kN
Opening stroke: 1400 mm
Distance between bars: 1100x960 mm
Mould height min: 350 mm
Mould height max: 850 mm
Size of mold platens: 1510x1440 mm
Ejector stroke: 250 mm
Ejector force for / back: 95 kN
Oil Reservoir Capacity - Injection Unit: 500 l
Maximum Cooling Power (32°C Water Inlet): 29.40 kWcool
Water Consumption (32°C): 4.80 m3/h

Maximum injection capacity: 890 cm³
Screw torque: 2000 nm // maximum screw speed @ reduced torque: 275 min-1
Reduced torque @ maximum screw speed: 1600 nm
Recovery rate (3-zone screw): 51 g/s // recovery rate (barrier screw): 67. 1 g/s
Injection rate: 353 cm³/s
Nozzle stroke: 950 mm
Ld ratio: 24. 0
Heating zones incl. Nozzle: 8 // heating wattage: 27. 5 kwel
Opening force with pressure pad: 510 kn
Maximum distance between platens: 1750 mmDrop Out Chute Width: 1100 mm
Weight of the Clamping Unit: 20000 kg
Maximum Mold Weight Moving Platen: 7330 kg
Maximum Mold Weight Stationary Platen: 7330 kg
Maximum Mold Weight Total: 11000 kg
Dry Cycle (Euromap 6) Stroke: 700 mm
Dry Cycle (Euromap 6) Time: 2.9 s

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Specifications

Clamping force 650 T
Screw diameter 60 mm
Tie bar spacing (H) 1100 mm
Tie bar spacing (V) 960 mm
Shot volume 890 cm³
Pressure on material 2400 bar
Platen length 1510 mm
Platen width 1440 mm
Opening of the press 1400 mm
Mould size 350/850
-------------------
Weight 6500 kg
Worked hours
Hours under power
State as-is, where-is
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2019
Offers online 1005
Last activity Jan. 4, 2025

Here is a selection of similar machines

Engel duo 2400/650 Electric injection moulding machine