FANUC ROBODRILL T21iDL Machining center - vertical Verified seller

Description

Fully verified machine. Possibility of checking in situ, with a precision guaranteed by ballbar test.
*FANUC 16i-MB

TABLE DIMENSIONS
*Dimension of work table: 850x410mm.
*Space in slots: 125mm.
*Load capacity: 250Kg.
*Slots: 3-14mm.

WORK TOUR:
*X axis course: 700mm.
*Y axis course: 400mm.
*Z axis course: 330mm.
*Distance from the table to the edge of the spindle: 150 to 480mm.
*Distance from the column to the center line of the spindle: 400mm.

PROGRESS:
*Rapid advance on the X-Y-Z axes: 54,000mm/min.
*Work feed: 1 to 30000mm/min.

ENGINE:
*Spindle drive motor: 5.5Kw (10min) 3.7Kw (continuous)
*Feed motors X-Y-Z: a8/4000is (2.0Kw)

HEAD:
*Spindle speed range: 100 to 10000min-1
*Tapered spindle hole type: 7/24 No. 30 taper
*Spindle speed: 50-6000rpm

TURRET:
*Tool shank type: MAS BT30
*Retention knob type: MAS P30T-1(45º)
*Type of tool cone: BT50
*Tool magazine: 14.
*Maximum tool length: 250mm.
*Tool change time: Approx. 1.8s

PRECISION:
*Positioning accuracy: 0.006mm/300mm
*Repeatability accuracy: +-0.002mm..

ENERGY SOURCES
*Electrical power supply: 11KVA.

GENERAL:
*Height: 2236+-10mm
*Floor space: 2115x2015mm.
*Mass of machine with control section: Approx. 2100Kg