FOD DPPA-II-50-E Multi-blade saw Verified seller

16,500 €

Make an offer

Manufacturer	FOD
Model	DPPA-II-50-E
Year
Location	Poland
Category	Saws - multi-blade saws
Product id	P230302096
Language	FOD DPPA-II-50-E Rozmítací pila FOD DPPA-II-50-E FOD DPPA-II-50-E FOD DPPA-II-50-E Mehrblattkeissäge FOD DPPA-II-50-E FOD DPPA-II-50-E Multi-blade saw Sierra multiple FOD DPPA-II-50-E Scie multilames FOD DPPA-II-50-E FOD DPPA-II-50-E FOD DPPA-II-50-E Sega multilame FOD DPPA-II-50-E FOD DPPA-II-50-E FOD DPPA-II-50-E Używana wielopiła FOD DPPA-II-50-E FOD DPPA-II-50-E FOD DPPA-II-50-E FOD DPPA-II-50-E Многодисковая пила FOD DPPA-II-50-E FOD DPPA-II-50-E Çoklu dilme testere FOD DPPA-II-50-E

Details
About this seller

Specifications

Blade diameter	55 mm
Cutting height	120 mm
Working width	500 mm
Engine power	30 kW
-------------------
Length x width x height	2500.0 × 1650.0 × 2200.0
Weight	2000 kg
Worked hours
Hours under power
State	good
At local norms	---------
Status

Description

Multisaw Edger FOD DPPA-II-50-E with lasers
– production in Poland
– DTR
– fixed sleeve
- cutting height 120 mm
- cutting width 500 mm
- engine power 30 kW
- material width max 730 mm
- four types of feed speed
- power of the feed motor 4 kW
- spindle diameter 55 mm
- sleeve diameter 90 mm
- electric disc spacing adjustment
- fixed edging sleeve 60 mm
- one movable shield
- two rows of anti-recoil pawls
- three lower pulling rollers
- two upper pulling rollers
- two lasers
- shaft support

Transport dimensions:
250x165x220 cm
weight ~ 2000 kg

Multisaws are machines used in the wood industry mainly for cutting prisms, but not only. Machines of this type can cut boards into smaller elements and cut lamellas. The principle of their operation is very simple, the machine has a spindle located in the central point, in the horizontal axis, on which tools in the form of discs are mounted. Depending on the purpose, weilopsaws can have one or two spindles. In the latter case, the device has greater cutting capabilities, mainly comparing the thickness of the material. An additional advantage of machines with two rollers is obtaining a smaller kerf. The next main division of machines is the method of material feed. They can be separated into shaft feed and crawler feed. When cutting the saw with shaft feed, the material is moved through the upper and lower shafts, depending on the construction, they can be driven all or only the lower ones. In turn, devices with a caterpillar move the wood with it, and the rollers placed in the body press the material against it. The selection of the right machine depends primarily on the intended use. It should be considered whether only elements for pallets or boards made of expensive exotic wood will be cut. All of these can influence the choice of machine.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase

Client type	Reseller
Active since	2015
Offers online	127
Last activity	Dec. 23, 2024

Description

Specifications

Blade diameter	55 mm
Cutting height	120 mm
Working width	500 mm
Engine power	30 kW
-------------------
Length x width x height	2500.0 × 1650.0 × 2200.0
Weight	2000 kg
Worked hours
Hours under power
State	good
At local norms	---------
Status

About this seller

Client type	Reseller
Active since	2015
Offers online	127
Last activity	Dec. 23, 2024

FOD DPPA-II-50-E Multi-blade saw Verified seller

Specifications

Description

Description

Specifications

About this seller

Here is a selection of similar machines

Categories

Menu

FOD DPPA-II-50-E Multi-blade saw