Specifications

Capacity 13000 u/h
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status
Datasheet Fuji AIMEX II S

Description

Status: Good working condition

Basic Specifications
Applicable panel size
(LxW) 48×48 mm to 774x318mm (double conveyor and dual transport)
48×48 mm to 774x586mm (double conveyor and single transport)
48×48 mm to 774×686 mm(single conveyor)
“Transport of panels up to L= 1,068 mm is possible, but over 774 mm is outside the placement range
Part types Up to 130 (when using 8 mm tape)
PCB loading time Double conveyor: 0 sec for dual transport, 5.0 sec for single transport; Single conveyor: 5.0 sec
Placement accuracy
(fiducial mark standard) HX(R12)/V12/H12HS: ±0.038(±0.050)mm (3a) cpk≥1.00※
HX(R4)/H08M: ±0.040 mm (3a) cpk≥1.00
OF: ±0.050 mm (3o) cpk≥1.00
HX(S1)/H02/H01: ±0.030 mm (3a) cpk≥1.00
”±0.038 mm is for placement of rectangular chips under optimal conditions at Fuji (with high accuracy tuning).
Conveyance height 900 to 950 mm

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type Reseller
Active since 2018
Offers online 46
Last activity Oct. 16, 2024

Description

Status: Good working condition

Basic Specifications
Applicable panel size
(LxW) 48×48 mm to 774x318mm (double conveyor and dual transport)
48×48 mm to 774x586mm (double conveyor and single transport)
48×48 mm to 774×686 mm(single conveyor)
“Transport of panels up to L= 1,068 mm is possible, but over 774 mm is outside the placement range
Part types Up to 130 (when using 8 mm tape)
PCB loading time Double conveyor: 0 sec for dual transport, 5.0 sec for single transport; Single conveyor: 5.0 sec
Placement accuracy
(fiducial mark standard) HX(R12)/V12/H12HS: ±0.038(±0.050)mm (3a) cpk≥1.00※
HX(R4)/H08M: ±0.040 mm (3a) cpk≥1.00
OF: ±0.050 mm (3o) cpk≥1.00
HX(S1)/H02/H01: ±0.030 mm (3a) cpk≥1.00
”±0.038 mm is for placement of rectangular chips under optimal conditions at Fuji (with high accuracy tuning).
Conveyance height 900 to 950 mm

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Specifications

Capacity 13000 u/h
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2018
Offers online 46
Last activity Oct. 16, 2024

Here is a selection of similar machines

Used FUJI AIMEX IIS