Specifications

Power in tons 165 T
Ram stroke 250 mm
Engine Power 18.5 kW
-------------------
Length x width x height 3670.0 × 1830.0 × 3130.0
Weight 12600 kg
Worked hours
Hours under power
State good
At local norms ---------
Status

Description

Pressure: 165 t
Bending length: 3100 mm
Stand width: 2600 mm
Stand projection: 450 mm
Stroke: 250mm
Installation height: 440 mm
Delivery speed: 100 mm/sec
Working speed: 1-10 mm/sec
Retraction speed: 120 mm/sec
Table height: 950 mm
Oil content: 250 l
Operating pressure: 265 bar
Voltage: 380V
Total power requirement: 18.5 KW
Machine weight approx.: 12600 kg
Dimensions L-W-H: 3670 x 1830 x 3130 mm

Furnishing:
- DELEM CNC control - model DA 65
* Swivel control panel, front right
* 2D graphical programming & product display
* Tool & program library
- CNC controlled axes:
* Y1 + Y2 / X / R / Z1 + Z2 axis
- CNC controlled back gauge (X axis)
- CNC controlled height adjustment from the back gauge (R axis)
- CNC controlled adjustment of the stop fingers (Z axis)
- CNC controlled pneumatic table crowning (V axis)
- GASPARINI hydraulic upper tool clamping
- GASPARINI hydraulic lower tool clamping
- many insert/bending tools (punches + matrices)
- 1x freely movable 2 hand / foot control
- 2x front stable support arms
- Rear safety device (lockable door)
- Safety device on the side (pivoting doors)
- original operating instructions + spare parts list (DE)

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type Reseller
Active since 2012
Offers online 29
Last activity Dec. 20, 2024

Description

Pressure: 165 t
Bending length: 3100 mm
Stand width: 2600 mm
Stand projection: 450 mm
Stroke: 250mm
Installation height: 440 mm
Delivery speed: 100 mm/sec
Working speed: 1-10 mm/sec
Retraction speed: 120 mm/sec
Table height: 950 mm
Oil content: 250 l
Operating pressure: 265 bar
Voltage: 380V
Total power requirement: 18.5 KW
Machine weight approx.: 12600 kg
Dimensions L-W-H: 3670 x 1830 x 3130 mm

Furnishing:
- DELEM CNC control - model DA 65
* Swivel control panel, front right
* 2D graphical programming & product display
* Tool & program library
- CNC controlled axes:
* Y1 + Y2 / X / R / Z1 + Z2 axis
- CNC controlled back gauge (X axis)
- CNC controlled height adjustment from the back gauge (R axis)
- CNC controlled adjustment of the stop fingers (Z axis)
- CNC controlled pneumatic table crowning (V axis)
- GASPARINI hydraulic upper tool clamping
- GASPARINI hydraulic lower tool clamping
- many insert/bending tools (punches + matrices)
- 1x freely movable 2 hand / foot control
- 2x front stable support arms
- Rear safety device (lockable door)
- Safety device on the side (pivoting doors)
- original operating instructions + spare parts list (DE)

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Specifications

Power in tons 165 T
Ram stroke 250 mm
Engine Power 18.5 kW
-------------------
Length x width x height 3670.0 × 1830.0 × 3130.0
Weight 12600 kg
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2012
Offers online 29
Last activity Dec. 20, 2024

Here is a selection of similar machines

Gasparini PBS CB 165/3000 Hydraulic press