Description
ASEPTIC MACHINES
GEA Tuchenhagen Dairy Systems GmbH / TDS-Ahaus pilot UHT plant with an indirect / direct heating module and homogeniser, previously used in a baby nutrition R&D centre.
Indirect unit, skid mounted, 50 - 200 ltr/h, viscocity of product till a max of 50 bar in the line and particals with a maximum size of 3 mm at the product infeed. Heating cycle by tubular heat exchangers (indirect), THE1: ± 4 - ± 70 °C / THE2: ± 70 - ± 95 °C / THE3: ± 95 - ± 120 °C / Heater1: 120 - ± 142 °C / THE4: ± 142 – ± 90 °C / THE5: ± 90 - ± 40 °C / THE6: ± 40 - ± 8 °C. The line is set at 142 °C for the current client but the unit is designed for a temperature up to 150 °C. 2 Leveltanks of 40 liter. Holding tubes of 3 – 5 – 10 – 20 – 30 – 2x60 seconds @ 100 liter per hour.
Direct steam injection module with flash tank, skid mounted, heating cycle from 90/110 till max 149 °C and holding tubes of 3 – 5 seconds @ 100 liter per hour.
Homogeniser, Niro Soavi, NS3006H, max. 200 liter per hour, max. pressure 600 bar, year 2005, motor 5,5 kW - 380/420V - 950 rpm - 50 Hz, ceramic pistons, ball valves, 2 stages.
Including all interconnecting piping, pumps (1x screw / mono pump 0,75 kW, 1x Jung Hyghspin 70 twin screw pump, year 2017 and 2x Grundfoss water pumps), valves, sensors, cabling and stainless steel control panel with controls (Siemens S7-300 PLC) and Siemens Simatic Panel.
Type Of Machine: Pilot UHT line
Capacity: 50 - 200 liter per hour
Products: Baby nutrition, max. 3 mm particles in product inlet
Temperature Range: 4 - 70 - 95 - 120 - 142/150 - 90 - 40 - ± 8 °C
Holding Tube: 3 / 5 / 10 / 20 / 30 / 2x60 seconds @ 100 liter per hour
Ground Surface: ± 600 x 165 x 270 cm
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase