Description
LIST OF EQUIPMENT OF THE „PLANT FOR PRODUCTION OF WOOD PELLETS“
- Container with movable floor and hydraulic power aggregate – 1 piece (year of production 2008)
- Cyclone for sawdust transport and control – 3 piece
- Hammer mill MILLER SRL – with 75 kw electric engine and electric cabinet – 1 piece (year of production 2007)
- Transport divider along with ventilation tubes and transport conveyors – 1 piece
- Large transport screw conveyors for biomass transport within the plant – 4 pieces
- Triple pass rotary drum dryer for drying sawdust capacity – 1 piece (year of production 2008)
- Furnace for production of hot air with own dozing control and temperature control system, electric cabinets of approximate power of 1 megawatt – 1 piece (year of production 2008)
- Pellet press General Dies model TAU 4 of approximate capacity of wood pellet production of 1.2 tons/hour with 110 kw engine and supporting equipment – 1 piece (year of production 2006)
- Cooler silo and dust removal grid of capacity of processing biomass at speed 1.2 tons per hour – 1 piece (year of production 2007)
- Weighing and packing in nylon equipment, semi-automatic, for pellets – 1 piece
- Electric cabinets for control of the entire plant for production of wood pellet – 1 piece segment (year of production 2009)
- Cables collected in palettes and marked by each cabinet, in total length of 3 km, weight approx 1 ton – 3 pallets
-. Ventilation tubes for transport of sawdust from dryer to storage silo – 1 set
- Ventilation tubes for transport of wood chips from chipper container to dryer – 1 set
- Ventilators for transport of sawdust – 2 pieces
- Screw air compressor 860l – 1 piece
- System for fire extinguishing capacity approx. 10 tons cistern, with own pump system and control – 1 piece
- Pump for grease dozing on central greasing system on pellet press – 1 piece
- Additional pieces, metal elements, supports, silo filter bags, are listed together in one set – 1 set
Total equipment fits in approximately 5 to 6 full lorry trucks. Organization of loading and transport can be performed by our side. All instruction information is available to the customer who decides to buy, along with few days course on main segments and order of installation, operation as well as advice on specifics of wood pellet production.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase