Specifications

Axis X 752 mm
Axis Y 508 mm
Axis Z 508 mm
Type Vertical
Type
CNC Haas NGC
Type of axis
Table length 500 mm
Table width 500 mm
Max. part weight 300 kg
Number of tool pockets 40
Spindle taper BT40
Max. spindle speed 15000 rpm
Spindle motor power 22.4 kW
Number of pallets 1
-------------------
Weight 8200 kg
Worked hours
Hours under power
State good
At local norms yes
Status visible
Datasheet Haas UMC-750SS

Description

The HAAS UMC-750SS 5-AXIS CNC machining center manufactured in 2018 in the United States is an ideal combination of functionality, productivity and precision. The machine enables efficient 3+2 axis machining and simultaneous 5-axis machining on complex workpieces weighing up to 300 kg. The machining process is carried out inside a large work area, which uses, among others, a strong spindle with direct drive, a 500 mm diameter tilting-rotary table with a precise pilot hole and a measuring probe from the renowned RENISHAW brand. Each tool taken from a capacious, 40-position magazine is continuously measured to ensure a continuous, uninterrupted process.
- number of axes: 5 (3+2 indexed)
- feed in X/Y/Z axis: 752/508/508 mm
- rotary table diameter: 500 mm
- maximum workpiece weight: 300 kg
- maximum spindle speed: 15000 rpm
- spindle taper: BT40
- spindle torque: 122 Nm
- 40-position tool magazine
- maximum tool diameter: 127 mm
- maximum tool length: 305 mm
- maximum tool weight: 5.4 kg
- power: 22.4 kW
- power supply: 3x 400 V
- machine weight: 8200 kg
- CNC controller: HAAS NGC
- tilting rotary table
- measuring probe for tools and workpieces: RENISHAW 3D
- HSM (High Speed ​​Machining) function accelerating 3D shape machining
- dynamic shifts of the workpiece zero point and control of the tool axis position
- threading without a compensation holder
- early voltage failure detection module
- HaasConnect system (remote monitoring of the machine's operating status via the VNC protocol)
- belt chip conveyor
- temperature compensation of lead-ball screws
- spindle taper blow-off
- spindle orientation
- electronic handwheel with LCD display
- programmable angular position of the coolant nozzle
- air blow-through the tool
- installation for connecting compressed air
- cooling through the spindle 69 bar
- coolant system with integrated coolant tank
- high-pressure coolant supply system 69 bar
- automatic central lubrication system
- network card
- additional 25 μm filter
- tray filter on the chips

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type Reseller
Active since 2010
Offers online 342
Last activity Nov. 13, 2024

Description

The HAAS UMC-750SS 5-AXIS CNC machining center manufactured in 2018 in the United States is an ideal combination of functionality, productivity and precision. The machine enables efficient 3+2 axis machining and simultaneous 5-axis machining on complex workpieces weighing up to 300 kg. The machining process is carried out inside a large work area, which uses, among others, a strong spindle with direct drive, a 500 mm diameter tilting-rotary table with a precise pilot hole and a measuring probe from the renowned RENISHAW brand. Each tool taken from a capacious, 40-position magazine is continuously measured to ensure a continuous, uninterrupted process.
- number of axes: 5 (3+2 indexed)
- feed in X/Y/Z axis: 752/508/508 mm
- rotary table diameter: 500 mm
- maximum workpiece weight: 300 kg
- maximum spindle speed: 15000 rpm
- spindle taper: BT40
- spindle torque: 122 Nm
- 40-position tool magazine
- maximum tool diameter: 127 mm
- maximum tool length: 305 mm
- maximum tool weight: 5.4 kg
- power: 22.4 kW
- power supply: 3x 400 V
- machine weight: 8200 kg
- CNC controller: HAAS NGC
- tilting rotary table
- measuring probe for tools and workpieces: RENISHAW 3D
- HSM (High Speed ​​Machining) function accelerating 3D shape machining
- dynamic shifts of the workpiece zero point and control of the tool axis position
- threading without a compensation holder
- early voltage failure detection module
- HaasConnect system (remote monitoring of the machine's operating status via the VNC protocol)
- belt chip conveyor
- temperature compensation of lead-ball screws
- spindle taper blow-off
- spindle orientation
- electronic handwheel with LCD display
- programmable angular position of the coolant nozzle
- air blow-through the tool
- installation for connecting compressed air
- cooling through the spindle 69 bar
- coolant system with integrated coolant tank
- high-pressure coolant supply system 69 bar
- automatic central lubrication system
- network card
- additional 25 μm filter
- tray filter on the chips

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Specifications

Axis X 752 mm
Axis Y 508 mm
Axis Z 508 mm
Type Vertical
Type
CNC Haas NGC
Type of axis
Table length 500 mm
Table width 500 mm
Max. part weight 300 kg
Number of tool pockets 40
Spindle taper BT40
Max. spindle speed 15000 rpm
Spindle motor power 22.4 kW
Number of pallets 1
-------------------
Weight 8200 kg
Worked hours
Hours under power
State good
At local norms yes
Status visible

About this seller

Client type Reseller
Active since 2010
Offers online 342
Last activity Nov. 13, 2024

Here is a selection of similar machines

HAAS UMC-750SS Machining center - 5 axis