HAAS VF-3YT Machining center - vertical Verified seller

Description

The HAAS VF-3YT CNC vertical machining center was manufactured in 2018 in the United States. This extremely easy-to-use machine with wide machining capabilities is used in precise machining of heavy details weighing up to 1588 kg. Thanks to the perfect combination of functionality, productivity and precision, the HAAS milling machine achieves excellent machining results throughout its entire service life, even with the largest loads.

The machining process is carried out by the machine on a stable work table with a length of 1372 mm and a width of 610 mm, using reliable components in the form of a spindle and cutting tools taken from a 20-position magazine. All machining parameters are programmed in the perfectly optimized HAAS NGC CNC control, which allows the creation of advanced machining programs in just a few steps. The offered HAAS VF 3YT CNC machining center has worked 21,148 hours so far. The total weight of the machine is 5697 kg.
CNC control: HAAS NGC
- X/Y/Z axis feed: 1016/660/635 mm
- X, Y, Z axis accelerated feed: 18 m/min
- worktable dimensions (length x width): 1372 x 610 mm
- maximum workpiece weight: 1588 kg
- maximum spindle speed: 8100 rpm
- spindle taper: CT40
- cooling through the spindle
- drive type: Inline Direct-Drive
- maximum spindle torque (at 2000 rpm): 122 Nm
- 20-position tool magazine
- maximum tool diameter: 89 mm
- maximum tool weight: 5.4 kg
- maximum cutting speed: 12.7 m/min
- working hours: 21148 h
- number of tool changes: 476834
- maximum distance from the spindle tip to the table surface : 742 mm
- minimum distance from spindle nose to work table surface : 107 mm
- number of T-slots : 7
- spacing between T-slots : 80 mm
- width of T-slots : 15.9-16 mm
- coolant tank capacity : 208 l
- engine power : 22.4 kW
- power supply : 3x 440; 50/60 Hz