HAAS VF2-SS Machining center - vertical Verified seller

Description

X Axis 762 mm, Y Axis 406 mm, Z Axis 508 mm
Spindle Nose to Table (~ max) 610 mm, Spindle Nose to Table (~ min)n 102
mm
SPINDLE
Max Rating 30.0 hp 22.4 kW, Max Speed 12000 rpm,
Max Torque 90.0 ft-lbf @ 2000 rpm 122.0 Nm @ 2000 rpm, Drive System
Inline Direct-Drive, Taper BT40, Bearing Lubrication Air / Oil Injection, Cooling
Liquid Cooled
TABLE
Length 914 mm, Width 356 mm, T-Slot Width 15.90 mm to 16.00 mm
T-Slot Centre Distance 125 mm, Number of Std T-Slots 3, Max Weight on
Table 680 kg
FEEDRATES
Max Cutting 21.2 m/min, Rapids on X 35.6 m/min, Rapids on Y
35.6 m/min, Rapids on Z 35.6 m/min
AXIS MOTORS
Max Thrust X 8874 N, Max Thrust Y 8874 N, Max Thrust Z
13723 N
TOOL CHANGER
Type SMTC, Capacity 30+1
Max Tool Diameter (full)64 mm, Max Tool Diameter (adjacent empty) 127 mm
Max Tool Length (from gage line) 279 mm, Max Tool Weight 5.4 kg, Tool-to-
Tool (avg) 1.8 s Chip-to-Chip (avg) 2.4 s
GENERAL
Coolant Capacity 208 L, AIR REQUIREMENTS METRIC, Air
Required 4 scfm @ 100 psi / 113 L/min @ 6.9 bar, Inline Air Hose 3/8 in,
Coupler (Air) 3/8 in, Air Pressure Min 80 psi 5.5 bar
ELECTRICAL SPECIFICATION Input AC Voltage
(3 Phase) - High* 440
VAC, Full Load Amps (3 Phase) - High* 35 A