Sorry, this offer is no longer available

Harrison Alpha 400 plus lathe

Here is a selection of similar machines

Specifications

Length between centers 1250 mm
Center height 195 mm
Turning Ø 245 mm
Ø above the bed 400 mm
Spindle bore 54 mm
Turning speed 2500 rpm
Overhauled no
-------------------
Weight 1700 kg
Worked hours
Hours under power
State good
At local norms ---------
Status
Datasheet Harrison Alpha 400 Plus

Description

Harrison Alpha 400 Plus with 400mm swing. 1250mm between centres. Spindle bore 54mm. Harrison/Fanuc operator panel and screen. quick change toolpost and toolholders, 3 jaw chuck

Specification:
Height of centres 195mm
Distance between centres 1250mm
Swing over bed 400mm
Floor to spindle centres 1093mm
Swing over cross slide 245mm
Swing in gap 585mm
Gap width from faceplate (approx) 165mm
Spindle bored to pass 54mm
Spindle speeds: Low range 15 to 300rpm
Medium range 35 to 830rpm
High range 110 to2500rpm
Tailstock travel 140mm
Tailstock diameter 73mm
Tailstock taper No. 5 MT
Approximate weight 1700kg

Machine equipped with:
3 jaw chuck
Harrison/Fanuc operator panel and screen
Quick change toolpost & 5 off toolholders
Guarding
Lighting
Coolant system

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type Reseller
Active since 2009
Offers online 20
Last activity Dec. 20, 2024

Description

Harrison Alpha 400 Plus with 400mm swing. 1250mm between centres. Spindle bore 54mm. Harrison/Fanuc operator panel and screen. quick change toolpost and toolholders, 3 jaw chuck

Specification:
Height of centres 195mm
Distance between centres 1250mm
Swing over bed 400mm
Floor to spindle centres 1093mm
Swing over cross slide 245mm
Swing in gap 585mm
Gap width from faceplate (approx) 165mm
Spindle bored to pass 54mm
Spindle speeds: Low range 15 to 300rpm
Medium range 35 to 830rpm
High range 110 to2500rpm
Tailstock travel 140mm
Tailstock diameter 73mm
Tailstock taper No. 5 MT
Approximate weight 1700kg

Machine equipped with:
3 jaw chuck
Harrison/Fanuc operator panel and screen
Quick change toolpost & 5 off toolholders
Guarding
Lighting
Coolant system

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Specifications

Length between centers 1250 mm
Center height 195 mm
Turning Ø 245 mm
Ø above the bed 400 mm
Spindle bore 54 mm
Turning speed 2500 rpm
Overhauled no
-------------------
Weight 1700 kg
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2009
Offers online 20
Last activity Dec. 20, 2024