Homag KAL 330/9/A6/L double sided edgebander Verified seller

Price on request

Make an offer

Manufacturer	Homag
Model	KAL 330/9/A6/L
Year	2011
Location	Germany
Category	Edgebanders - double sided
Product id	P230630019
Language	Homag KAL 330/9/A6/L Dýhovačka - oboustranná Homag KAL 330/9/A6/L Homag KAL 330/9/A6/L Homag KAL 330/9/A6/L Gebrauchte doppelseitige Kantenanleimmaschine Homag KAL 330/9/A6/L Homag KAL 330/9/A6/L double sided edgebander Canteadora bilateral Homag KAL 330/9/A6/L Plaqueuse de chants bilatérale Homag KAL 330/9/A6/L Homag KAL 330/9/A6/L Homag KAL 330/9/A6/L Bordatrice bilaterale Homag KAL 330/9/A6/L Homag KAL 330/9/A6/L Homag KAL 330/9/A6/L Używana okleiniarka dwustronna Homag KAL 330/9/A6/L Homag KAL 330/9/A6/L Homag KAL 330/9/A6/L Homag KAL 330/9/A6/L Кромкооблицовочный станок - Двусторонний Homag KAL 330/9/A6/L Homag KAL 330/9/A6/L İkinci el çift yönlü kenar bantlama makinası Homag KAL 330/9/A6/L

Details
About this seller

Specifications

Board thickness	60 mm
Feed advance	18 m/min
Glue tank	Yes
-------------------
Worked hours
Hours under power
State	good
At local norms	---------
Status

Description

used one-sided edge banding machine
Make: Homag
Type: Profi KAL 330/ 9/A6/L
Year of construction: 2011

One-sided edge banding machine for processing straight workpiece edges and for gluing and reworking various edge materials in longitudinal and transverse throughput.

basic machine:
- Continuous machine stand for constructing the machining units.
- Fixed stop side on the left
- Gray paintwork RDS 240 80 05
- Infeed ruler adjustable
- Inlet lock pneumatically controlled

top pressure:
Driven composite V-belt
Electronic height adjustment
Position display digital

Workpiece transport device:
Transport chain with rubber pad, 80 mm wide
Hardened precision running and guide surface
- Magnetic braked transport chain
- Workpiece support with roller rail, extendable approx. 800 mm
- Noise protection for joint and aggregate part with individual suction

feed:
- 18m/min

(feed optional)
- 18-25 / 18-32 m/min

working height:
- 950mm

Pneumatic connection:
- 6 bars

- Ground conditions must correspond to the foundation plan.

Workpiece and edge parameters:
Workpiece width without edge min:

With a workpiece thickness of 12-22 mm:
- 60mm

With a workpiece thickness of 23-60 mm:
- 100mm

(Depending on the workpiece length)

Workpiece stock:
- 30mm

workpiece thickness:
- 12-60mm
(Workpiece thickness optional: 80/100 mm

Edge material roll:
0.3-3mm²

Edge cross-section max.:
- For PVC: 135 mm²
- For veneer: 100 mm²

roll diameter max.
- 830mm²

Edge material stripes:
Edge cross-section max. for strips:
- 900m²

- The machine arm is responsible for the use of suitable materials (plates, adhesives, edges, cleaning agents, paints, etc.).

Aggregate equipment:
- Free space for the construction of a joint milling unit
(for joint milling of the workpieces before gluing)

Gluing unit A20 basic:
Workpiece preheating:
- For heating the edge of the workpiece before applying the glue
- To improve the gluing quality

Quickmelt application unit:
- Electronic temperature control with LED display.
- Glue temperature reduction automatically when work is interrupted (time freely selectable)
- Melting capacity up to max. 12 kg / h
- Glue roller drive at feed stop
- Glue container lift at feed stop
- Workpiece-actuated glue container clamping

Magazine 1 roll:
- For solid edges, strip goods and rolled goods
- Automatic strip separation via vacuum suction cups
- 1 edge feeder
- Roll separator
- Edge monitoring with feed stop
- Edge sequence control for preselecting the edge channels in any order. If an edge channel is empty, the next selected channel is activated (with multiple magazines)

Pressure Zone C
- 1 driven pre-compression roller Ø 150 mm
- 6 squeezing rollers Ø 70 mm
- Pneumatic pressure adjustment
- Central adjustment to different edge thicknesses

Free space for processing units
- see options list for other processing units

Electrical equipment:
- Operating voltage 400 volts, 50/60Hz
- Control cabinet attached
- Installed according to Euronorm EN 60204
- Electronic frequency converter with engine braking function
- Country-specific operating voltage adjustment via transformer (optional)
- FI protective circuit only permitted in conjunction with an all-current sensitive/selective FI protective switch. If the performance of this device is not sufficient, we recommend using a residual current monitoring device on site
- Prescribed ambient temperature:
+ 10 to + 40 ° C

Feed infinitely variable 18-25 m/min left
- Instead of feed 18 m/min
- Feed rate controlled
- Setting the speed on the input unit

- Conversion from laserTec to PU/EVA manually
- Designed for straight workpiece edges, no soft forming

Consisting of:
- For melting the laser activation layer on the edge material.
- Oscillating laser beam
- Automatic adjustment to the workpiece thickness
- Wavelength of laser radiation 980 nm

Laser safety device:
- Laser certificate protection class 1 (the machine can be operated without additional protective measures.)
- The laser corresponds to laser protection class 4 and is converted to laser class 1 by the protective device.
- The operator may not carry out any service work on the laser.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase

Client type	Reseller
Active since	2013
Offers online	47
Last activity	Dec. 17, 2024

Description

Specifications

Board thickness	60 mm
Feed advance	18 m/min
Glue tank	Yes
-------------------
Worked hours
Hours under power
State	good
At local norms	---------
Status

About this seller

Client type	Reseller
Active since	2013
Offers online	47
Last activity	Dec. 17, 2024

Homag KAL 330/9/A6/L double sided edgebander Verified seller

Specifications

Description

Description

Specifications

About this seller

Here is a selection of similar machines

Categories

Menu

Homag KAL 330/9/A6/L double sided edgebander