Homag KF 20/36/QE/25 Door plant Verified seller

Description

KF 20/36/QE/25
Double-sided HOMAG format processing and
edge banding machine.
Fixed fence side left,movable side right.

GRUNDMASCHINE:
- with continuous machine column and
unit support, prepared for mounting the
sizing, edge banding and finishing units.
- Glue roller drive at feed stop

WORKPIECE TRANSPORT DEVICE:
- with precision, hardened running and
guide surfaces
- Magnetic motor braking of the transport chain

TOP PRESSURE:
- with driven V-belt
- motorised height adjustment via cardan drive
with digital position indicator

WIDTH ADJUSTMENT OF THE MOVING SIDE:
- linear guide as well as rolling guides on
hardened supports
- motorised rapid/creep feed drive
- ball screws and cardan drives for precise
precise positioning
- digital position display

PAINT:
- Textured paint grey RDS 240 80 05

ELECTRICAL EQUIPMENT:
- Operating voltage 400 volts, 50 Hz.
- Control voltage 230 volts, 50 Hz.
- Installed according to Euronorm EN 60204
- Manual switch for set-up operation
- Free-standing control cabinet
- Frequency converter free-standing
- Connection cable to machine according to installation plan

HOMATIC ELECTRONIC CONTROL:
- Programmable logic controller (PLC) with
LED display of all inputs and outputs.
outputs. Integrated line control for
contactless control of the processing units
- Multitask control of the PLC for precise
unit inserts
- Any number of parts in the machine
- Compatible interface to all

HOMATIC input systems
- Specified ambient temperature:
+ 5 degrees to + 35 degrees Cels.
SAFETY AND PROTECTIVE DEVICES:
- all machines for EU member states with
CE mark according to EC Machinery Directive
89/392/EWG appendix IIA
- Wood dust tested TRK value max. 2 mg/m3 with
Compliance with the extraction capacity to be
extraction capacity according to extraction plan
- Documentation in duplicate

TECHNICAL DATA:
- Feed infinitely variable 10 - 40 m/min.
- Workpiece projection 40 mm
- Workpiece thickness 8 - 60 mm
- Working height up to upper edge of chain 950 mm
- Working width double-sided min. 240 - 270 mm
(depending on machine equipment)
- Working width double-sided max. 2500 mm
- The technical data for the basic machine
can change due to the machining units
change
- Ground conditions must correspond to the foundation plan
correspond to
-----------------------
Both the
-overall installation (profiling/edge line) as well as the
-profiling line
-edge processing line
are available as single units.