Homag VFL 79/02 Woodworking machine Top seller

Description

Single sided postforming line, capable of doing L - and U profiles, with or without insert.
Workpiece thickness: 16 to 60 mm.
Min. workpiece width: 150 mm.
Workpiece overhang: 70 mm.
Max. laminate overhang: 105 mm.
Feed speed 3 - 18 m/min.
Fence side at the left
Equipment:
Squaring and shaping part:
1 x Postforming squaring unit, 2 motors each 1kW, 1st motor removing the laminate, 2nd motor trimming the overhaning laminate
1 x scoring, motor 1 kW, top position
1 x milling unit for the laminate when doing U profiles
1 x laminate support
Postforming part
1 x blow cleaning nozzle
6 x glue nozzle for the glue application
2 x glue roller
9 x IR heating, each 2,2 kW
2 x Hot air blower, each 10 kW
1 x Basic postforming pressure zone for L-profiles, using rollers
1 x Basic postforming pressure zone for U-profiles, using rollers
1 x VF postforming pressure zone for special profiles, using pressure paths
Finishing part:
1 x Top fine trimming unit 0,6 kW
1 x Milling unit for U-profiles or laminate grooving
1 x Basic postforming pressure zone for L-profiles, using rollers
1 x Insert/inlay grooving unit UF13, motor 2,25kW
1 x inlay/insert unit with PVAc glue application, cleaning blower, insert supply from the top
1 x Top buffing unit