Specifications

-------------------
Worked hours
Hours under power
State good
At local norms yes
Status visible

Description

Single chamber hot air shrink tunnel BS-4535 with conveyor for heat shrinking of welded PVC, PP, PE, LDPE and POF polyolefin product packaging.

The BS-4535 shrink tunnel is characterized by its precise thermal control and variable tunnel height. It can be adjusted from 10cm to 33cm in height.

This line is equipped with a conveyor consisting of chains on the sides and rotating metal rollers, which are additionally coated with silicone. The belt passes through a hot-air tunnel equipped with convection heating by 4 radiators at the bottom of the chamber stretching the entire length of the belt, whose heat is distributed by a large fan through side vents on the sides of the belt and also passes through the belt itself. The heaters have a total power of 6kW, which is enough power to shrink any heat shrinkable film in a very short time. The chamber has a hinge on each side which significantly reduces heat loss. The temperature inside the shrink tunnel is controlled by a feedback control unit according to the user's exact settings.The control of the shrink tunnel is very easy, the device is switched on by a three-phase circuit breaker on the panel. To control the individual elements, conventional switches are used, specifically for the belt, heating and airflow. The temperature setting is done by a control unit with two segment displays - target and actual temperature. The conveyor speed can be controlled by a potentiometer from 0 - 10m/min.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type User – small or medium company
Active since 2024
Offers online 1
Last activity Dec. 19, 2024

Description

Single chamber hot air shrink tunnel BS-4535 with conveyor for heat shrinking of welded PVC, PP, PE, LDPE and POF polyolefin product packaging.

The BS-4535 shrink tunnel is characterized by its precise thermal control and variable tunnel height. It can be adjusted from 10cm to 33cm in height.

This line is equipped with a conveyor consisting of chains on the sides and rotating metal rollers, which are additionally coated with silicone. The belt passes through a hot-air tunnel equipped with convection heating by 4 radiators at the bottom of the chamber stretching the entire length of the belt, whose heat is distributed by a large fan through side vents on the sides of the belt and also passes through the belt itself. The heaters have a total power of 6kW, which is enough power to shrink any heat shrinkable film in a very short time. The chamber has a hinge on each side which significantly reduces heat loss. The temperature inside the shrink tunnel is controlled by a feedback control unit according to the user's exact settings.The control of the shrink tunnel is very easy, the device is switched on by a three-phase circuit breaker on the panel. To control the individual elements, conventional switches are used, specifically for the belt, heating and airflow. The temperature setting is done by a control unit with two segment displays - target and actual temperature. The conveyor speed can be controlled by a potentiometer from 0 - 10m/min.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Specifications

-------------------
Worked hours
Hours under power
State good
At local norms yes
Status visible

About this seller

Client type User – small or medium company
Active since 2024
Offers online 1
Last activity Dec. 19, 2024

Here is a selection of similar machines

HOTAIR BS-4535 Sealer/ shrink tunnel