Huron KX10 Machining center - vertical Verified seller

Description

Construction Cast iron
(Table/Y axis) Usable surface: 1250 x 700
Permissible load: 1500 daN
Table slots Longitudinal T-slots
Number of slots 6
Width of reference slot 18 H 7
Width of other slots: 18 H 12
Slot spacing 100 mm
Height between table top and floor 930 mm
Guides: Roller runners on guide rails
Movement (table): Three-phase servomotor directly coupled to the spindle end with recirculating ball bearings
Stroke 700 mm
Rapid traverse speed :30000 mm/ mn
Traverse speed during machining (continuous variation): 1 - 10000 mm/ mn
Nominal table axis thrust: 600 daN2
Acceleration: 3 m/ sec.
Lubrication: Centralized
Measurement: Incremental linear measuring system
Safety: Stroke limiters
Slide construction Spheroidal cast iron TROLLEY
(slide/X-axis)
|-SLIDE (SLIDE AXIS/Z)
(slide axis/Z) Guides (slide axis):
Carriage construction Cast iron
Roller runners
Guides (sliding axis) Plain bearing sliding guides
Motion (slide): Three-phase servomotor directly coupled at the spindle end with recirculating balls
Motion (slide): Three-phase servomotor coupled by belt to the spindle with circulating balls
Sliding carriage Stroke: 1000 mm 550 mm
Rapid traverse speed:30000 mm/ mn 18000 mm/mn
Nominal table axis thrust: 600 daN 1000 daN (drilling)
Traverse speed during machining (continuous variation) 1-10000 mm/mn
Acceleration: 3 m/s2
Lubrication: Centralized
Measuring: Linear measuring system
incremental
Safety: Stroke limiters