IMA Advantage 400 L edgebander Verified seller

Description

one-sided edge banding machine
Make: IMA
Type: Advantage 400L
Year of construction: 2011

Technical specifications:
Working length 6700 mm
Feed speed 20 m/min for Advantage 400 + 400L

Joining milling unit 08.379
for edge trimming/calibrating formatted workpieces,
- with 2 motors a 4.0 kW, 8800 rpm, 150 Hz, controllable,
- with static frequency converter,
- horizontal and vertical adjustment with mechanical digital display
- incl. single suction.
without tools

Gluing unit 283.1513 with oil bath gear
with glue indication 0.8 l 60 mm high
(can be used for hot-melt adhesive or PU adhesive)
with pneumatic quick-lock system, chem-coat coating, a glue application quantity setting readable via a mechanical digital display, lateral overrun shoe and electronic temperature control
with single roll/strip magazine, roll diam. 800mm
with main pressure roller and 5 post-pressure rollers

Snipping unit 08.415
for trimming the front and rear edge overhang, pneumatically swiveling to 0° or 8°, with 2 motors 660 W, 400 V, 150 Hz, 9000 rpm,
including static frequency converter with electronic motor brake
without tools

Milling unit 08.0555
for pre-milling from above and below
for flush milling from above and below
2 milling motors 1000 W, 200 Hz, incl. frequency converter with brake function,
working in reverse,
with 2-fold vertical fixed point adjustment for automatic
Adjustment for pre-milling or flush milling,
without tools

Copy milling unit SKF-L
with motor quick-change device, for milling off excess strips on front and rear workpiece profiles at the bottom and top, as well as the bottom and top longitudinal edge, without inner radius, with feeler rollers diameter 70,
with 2 motors 180 W, 400 V, 200 Hz, 12000 rpm
and 2 motors 400 W, 400 V, 200 Hz, 12000 rpm,
incl. frequency converter with braking function,
incl. single suction,
max. profile length in throughput direction: approx. 50 mm,
max. workpiece thickness: 60 mm
max. working speed: approx. 20 m/min.
Minimum distance between 2 workpieces: approx. 400 mm
min. workpiece overhang = 35 mm + profile depth
without tools

Profile scraper unit 08.519
For scraping an upper and lower milled quadrant profile on glued plastic edges. With presettable HM scraper tools for easy and quick changing. With horizontal and vertical scanning. With manual horizontal adjustment with mechanical digital displays.
When the power unit is not switched on, it is pneumatically disengaged horizontally and vertically. With individual suction nozzle and chip collector.

Self-scanning scraper unit 08.521
for removing residual hot-melt adhesive from the edges of the top and bottom of workpieces, controllable, with 1 upper and 1 lower cutting plate, with 2 air nozzles for blowing the scraper clean

Buffing unit 08.617-2
for cleaning and polishing the glued paper and plastic edges.
With a bottom and top motor, 180W, 50Hz, 1400rpm,
with 2 polishing discs 50 x 160 x 19 mm.
The motors work synchronously and are inclined,
as well as pivoted in the feed direction.
Each motor is individually vertically adjustable.
Incl. pneumatic release device.

Standard milling unit 08.190,
for grooving/rebating and profiling
Consisting of:
- a milling stand with vertical guidance, manual adjustment
(mechanical digital display)
- a horizontal guide, manual adjustment (mech. digital display)
- a milling motor 4.5 kW, 150 Hz, 9000 rpm incl. frequency converter with brake function, without tools
- a pneumatic operation control or decommissioning
- a manual 90° swivel device from 180°-270°, with same and counter rotation function; (Motor shaft can be swiveled horizontally to vertically, with a vertical motor shaft the motor is at the top and the tool is at the bottom)
- Reversing switch for the direction of rotation
- an extraction hood for motor position 270° (motor shaft vertical) or 180° (motor shaft horizontal, grooves from below) with airlock from above and below, max. tool diameter 150 mm
- incl. groin retention

Basic machine description Advantage 400, 400L

Technical data "workpiece":
Workpiece length min. 150 mm
Workpiece width min. 65*/ 150 mm
*at max. workpiece thickness of 25 mm
workpiece thickness
min. 8 mm / 12 mm (with profile scraper)
max. 40 mm (with MFA 08.346) / 60 mm (with SKF)
Smallest workpiece 65x380 / 380x150 x 19 mm
Machining allowance per workpiece edge 0 - 5 mm*
(*observe max. cutting cross-section)
Workpiece shape rectangular
Material chipboard, MDF
Surface material: direct coating (melamine resin paper), paper, foil, veneer
Laterally protruding coating material 0 mm

Technical data "Edge material"
Roll material without foil:
- Paper edges & plastic edges: 0.3 - 3.0 mm
(Foil only with additional equipment)
- Veneer edges: 0.5 - 3.0 mm
max. edge cross-section 150-180 mm²
Cut edge strips:
- Lasts 3.0 - 12.0 mm
max. bar cross-section 520 mm²
edge height
- at least 12 mm
- max. 65mm
Max. upper edge overhang 2 mm
Edge Profiles:
- Paper edge approx. 0.4 mm bevel 15°
- Plastic edge up to 3.0 mm radius depending on the tool
- Mill the strip up to 12 mm flush

Technical data "machine"
Constant workpiece overhang of 35 mm + edge thickness
from the chain track
max. cross section 520 mm²
passage width
min. (with a projection of 35 mm) 65 mm
Min. workpiece length in feed direction 150 mm
Basic height (upper edge of chain track) 900 mm
Aggregate side: In feed direction on the left
Pneumatic connection approx. 7 - 8 bar
Control voltage: 24V DC / 230V AC
Only at ambient temperatures of the control cabinet between
+10 and +35 degrees C the machine can electrically/electronically
work perfectly.

The basic machine consists of:
· Base frame with integrated electrical installation
· Drive for workpiece transport
· Transport chain with 80 mm wide and 60 mm long chain plates
· Top pressure
. manual height adjustment of the top pressure,
Workpiece thickness can be read digitally
· Horizontal manually adjustable fence with veneer fence
· User-friendly PC control with
- Touchscreen and graphical interface (New version 15 inches)
- Simple, machining-related program creation
- Integrated PLC and electronic pattern control
- Program memory for up to 1000 programs
· Safety and protective devices according to CE regulations.
· Soundproof/protective hoods
· Support rail for approx. 1500 mm wide workpieces, extendable.
Larger workpieces require additional support.
Paintwork:
- Basic machine with hoods grey-white RAL 9002
structure
- Units dusty gray RAL 7037
structure and smooth
- Safety covers signal red RAL 3001
structure

Mains voltage: 3/N/PE, 400/230 V, 50 Hz
with a resilient neutral conductor
(FI protective circuit not applicable)
Electrical installation according to EN
When ordering, the information on the electrical data sheet is decisive! Deviations must be offered separately.
(surcharge)
(If this mains voltage cannot be maintained, an uninterruptible power supply must be installed at the expense of the machine operator)

Machine lettering: German

Spare parts catalog in German

OPERATING INSTRUCTIONS German

Electronic height adjustment of the upper pressure (on one side)
by means of positioning control, including measuring system, with start/stop positioning for three-phase motor, tolerance monitoring

double compound V-belt
Belt width approx. 70 mm

control technology

ICOS open TS
Features:
- PC-based control system with integrated PLC and electronic line control
- User-friendly interface
- Navigation and operation via touch screen
- Simple, machining-related program creation
- Program memory for max. 1000 programs
- Program name 3-digit numerical
- Fast data exchange between controller and I/O components using EtherCat

Automation package Advantage for ruler, pressure zone and SKF

Feed lock for a workpiece return standard.

Operating voltage: 3N PE 50Hz 400V
Rated power: 20 kW
Rated Current: 44A