IMA Combima Systems/ I/R751220/R3 Single sided edgebander Verified seller

Description

1 single-sided, combination machine for sizing, edge banding and edge finishing of panel-shaped workpieces made of wood and/or wood-based materials.

- Automatic infeed table
- KFA unit
- Return


Technical data "Workpiece":
Workpiece length
- min.: 238 mm
- max.: 2350 mm

Workpiece width
- min.: 142 mm
- max.: 800 mm

Workpiece thickness:
-min.: 8 - 40 mm


Technical data "strand" (longitudinal machining only):

Roll material:

- Paper edges & plastic edges: 0.3 - 3.0 mm
- Veneer edges: 0.5 - 3.0 mm

Edge height:
- min.: 14 mm
- max.: 45 mm

Technical data "Machine":

Variable workpiece projection from the chain track
(incl. edge for edge thickness 0.3 - 3 mm):
- min.: 40 mm
- max.: 80 mm

-PC control ICOS open

- Feed speed v=5-25 m/min, frequency-controlled drive

- Inclined roller table as infeed section


NC infeed system for front and carcase parts
- for length- and width-independent automatic workpiece infeed on single-sided edge processing machines.

Only for the production of extruded goods in the 2nd pass

- An additional stop ruler, adjustable via Nc axis,


Double trimming unit 08.376:
- Controllable

- Motor 1 synchronized and motor 2 counter-rotating

- Space reserve on the unit carrier for a double hogger with electrical pre-installation for 2 x 6.6 KW.

- Radiant heater 300 lg, 2x1.5 kW, for preheating the edge of the workpiece.

- Gluing unit 04.1570 Systems for straight edges and adhesive application to the workpiece. The edge thickness is max. 3 mm depending on the magazine used.

- Glue specification for workpiece thickness max. 50 mm

- 2 pre-melting containers for PU glue

- 12-compartment edge magazine for roll material 0.3 - 3 mm thick. (8 tracks up to 3 mm, 4 tracks up to 1.3 mm)

Vertical roll holder for 12 rolls:
- max. roll diameter 850 mm
- max. edge height 45 mm

- Snipping unit 08.42, for 2 motors mounted on the top pressure

- Pre- and trimming unit with height sensing
- with 1 motor 1000 W
- Multiple profile / chamfering unit, with 2 motors 1000 W
- Contour trimming unit KFA 30

- Multiple profile scraper unit

- Flat scraper 08.517

- Copying buffing unit 08.604

- Buffing unit 08.617-2

- Double trimming stand 75.184 1050 mm high both sides of the stand can be used

- Trimming/ profile trimming/ grooving unit 75.34 with 1 motor, without tools, 100 Hz, 6000 rpm

- Milling / profile trimming / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 600 rpm

- Motor shaft for use with the Hydro-Format tool system

- Return, make Meinert