Specifications

-------------------
Worked hours
Hours under power
State as-is, where-is
At local norms ---------
Status

Description

Karl Suss Manual Probestation PM8 with Mitutoyo microscope and objectives

The PM8 from SUSS MicroTec offers an optimal solution for precise analytical sample applications with a diameter of up to 140 mm. It is ideal for device and wafer characterization testing (DWC), failure analysis (FA), high frequency testing (HF) as well as opto-technical and MEMS testing.

The PM8's integrated magnets on the steel plate not only ensure effective vibration damping, but also precise positioning of the samples. This creates a stable and accurate environment that is ideal for demanding sample and RF testing.

A first-class microscope and high-quality objectives from Mitutoyo with magnifications of 2x, 10x, 20x and 50x characterize the sample station. The infinitely variable zoom from 1x to 2x and the integrated camera adapter considerably extend the flexibility for various applications.

The microscope is also equipped with an LED light source and a light guide from Schott.

Ergonomically designed, the PM8 offers a low profile design for easy access to all parts of the system.

The microscope and sample station are equipped as follows:

Mitutoyo optics carrier with stepless zoom from 1x - 2x
Mitutoyo phototube with eyepiece pair WF 10x/24 (focusable)
4-position nosepiece with the following objectives:
M Plan Apo 2x/0.055
M Plan Apo 10x/0.28
M Plan Apo 20x/0.42
M Plan Apo SL 50x/0.42
Schott cold light source KL 300 LED with Schott light guide
Three Probe Heads PH100, one of them is defective at the tip
As can be seen in the pictures, three of the four objectives have scratches, but these are not noticeable when viewed on a wafer.

The probe station comes without controls, the pneumatic and electrical elements have not been tested.

The microscope and the sample station are in good, little-used condition and will be shipped on a pallet by Schenker.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type Reseller
Active since 2018
Offers online 14
Last activity Nov. 26, 2024

Description

Karl Suss Manual Probestation PM8 with Mitutoyo microscope and objectives

The PM8 from SUSS MicroTec offers an optimal solution for precise analytical sample applications with a diameter of up to 140 mm. It is ideal for device and wafer characterization testing (DWC), failure analysis (FA), high frequency testing (HF) as well as opto-technical and MEMS testing.

The PM8's integrated magnets on the steel plate not only ensure effective vibration damping, but also precise positioning of the samples. This creates a stable and accurate environment that is ideal for demanding sample and RF testing.

A first-class microscope and high-quality objectives from Mitutoyo with magnifications of 2x, 10x, 20x and 50x characterize the sample station. The infinitely variable zoom from 1x to 2x and the integrated camera adapter considerably extend the flexibility for various applications.

The microscope is also equipped with an LED light source and a light guide from Schott.

Ergonomically designed, the PM8 offers a low profile design for easy access to all parts of the system.

The microscope and sample station are equipped as follows:

Mitutoyo optics carrier with stepless zoom from 1x - 2x
Mitutoyo phototube with eyepiece pair WF 10x/24 (focusable)
4-position nosepiece with the following objectives:
M Plan Apo 2x/0.055
M Plan Apo 10x/0.28
M Plan Apo 20x/0.42
M Plan Apo SL 50x/0.42
Schott cold light source KL 300 LED with Schott light guide
Three Probe Heads PH100, one of them is defective at the tip
As can be seen in the pictures, three of the four objectives have scratches, but these are not noticeable when viewed on a wafer.

The probe station comes without controls, the pneumatic and electrical elements have not been tested.

The microscope and the sample station are in good, little-used condition and will be shipped on a pallet by Schenker.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Specifications

-------------------
Worked hours
Hours under power
State as-is, where-is
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2018
Offers online 14
Last activity Nov. 26, 2024

Here is a selection of similar machines

Karl Suss Mitutoyo Mikroskop Laboratory equipment